Installation guide

XR500 Series Installation Guide Digital Monitoring Products

ComPlIanCe

False Alarm Reduction Programmable Options (continued)

35.2 Call Waiting (ANSI/SIA CP-01-2000)

The Call Waiting default setting is disabled. To cancel the Call Waiting feature, program * (star) 7 0 P (pause), the

standardtelephonecodeprexthatcancelscallwaiting,intothetelephonenumberstring.CancelCallWaitingfor

telephonelinesthathaveCallWaitingoperationalonthetelephoneline.SeetheXR500SeriesProgrammingGuide

(LT-0679).

Caution: A call waiting cancel programmed on a non-call waiting telephone line, would prevent

communication to the central station.

35.3 Occupied Premise (ANSI/SIA CP-01-2000)

When only two areas are used, and area one is named Perimeter, and area two is named Interior, and no exit type

zone transition occurs during the exit delay because the premise continues to be occupied, the Interior area will

automatically disarm at the end of the exit delay.

35.4 Entry Delay (ANSI/SIA CP-01-2000)

OnlyuseEntryDelay1.DonotuseEntryDelay2,3,or4.SeetheXR500SeriesProgrammingGuide(LT-0679).

35.5 Minimum Installation Requirements (ANSI/SIA CP-01-2000)

SIA CP-01-2000 minimum system installation requirements include an XR500, a listed local Bell, and off premise

DACT communication to an SCS-1R receiver plus one of the following compatible keypads.

630FFireCommand™Center

690, 790, 639/793 Security Command™ keypads

7060, 7063, 7070, or 7073 Thinline™ keypads

7060A, 7063A, 7070A, or 7073A Aqualite™ keypads

7160, 7163, 7170, or 7173 Thinline™ keypads

7760 Clear Touch™ keypad

ULC S304 Specications

Signal Receiving Center and Premise Burglar Alarm Control Units

36.1 Level V Communication

LevelVcommunicationchannelsecurityisprovidedforInternet,Intranet,LANorWANnetworkswhenconguredas

a NET communicating system using the XR500N. Additionally, the following options must be programmed in XR500

Series panel Communication:

SUB CODE: YES

CHECKIN TIME: 2 MINUTES

FAILTIME: 3MINUTES

SEND COMM TRBL: YES

TCP COMM: YES

In addition, the SCS-101 Network Line Card installed in the SCS-1R Receiver must have the ACK Substitution Message

programmed as NO.