Installation guide
XR500 Series Installation Guide Digital Monitoring Products
5
IntRoduCtIon
3.3 Lightning Protection
Metal Oxide Varistors and Transient Voltage Suppressors help protect against voltage surges on XR500 Series input
and output circuits. Additional surge protection is available by installing the DMP 370 or 370RJ Lightning Suppressors.
3.4 Accessory Devices
Interface Adaptor and Interface Cards
461 Interface Adaptor Card Allows you to connect two or more expansion interface cards to the XR500 Series panel.
The 461 is an expansion mother board that plugs into the panel J6 Interface Connector and
is required when using two or more Interface Cards. Use combinations of Interface Cards
for expanding zones, network interfacing, local printing, and connecting wireless devices.
462N Network Interface Card Allows you to connect the XR500 Series to any compatible data network and use its
communication capability in place of standard dial out telephone lines. The 462N also
provides an LX-Bus™ for connecting zone and output expansion modules to the panel.
462P Printer Interface Card Allows you to connect the XR500 Series to any compatible serial printer providing the user
with real-time event recording. The 462P also provides an LX-Bus™ for connecting zone and
output expansion modules.
463GDigitalCellular
Communicator Card
AllowsyoutoconnecttheXR500SeriestoanycompatibleGPRS/SMSnetworkanduseits
communicationinplaceofstandarddialoutlines.The463GalsoprovidesanLX-Bus™for
connecting zone and output expansion modules to the panel.
472 Wireless Interface Card Provides one LX-Bus for connecting up to 200 wireless or hardwired zone expansion
modules.
481 Expansion Interface Card Provides one LX-Bus for connecting up to 100 zone and output expansion modules.
Expansion Modules
710/710FBusSplitter/Repeater AllowsyoutoincreasekeypadorLX-Bus™wiringdistanceto2500feet.Model710Fisfor
24 VDC applications.
711 Single Point Zone Expanders Provides one Class B zone for connecting burglary devices.
714, 714-8, 714-16 Zone
Expanders
ProvidesClassBzonesforconnectingburglaryandnon-poweredredevices.
712-8 Zone Expander Provides Class B zones for connecting burglary devices.
715, 715-8, 715-16 Zone
Expanders
Provides 12 VDC Class B powered zones for connecting smoke detectors, glassbreak
detectors, and other 2- or 4-wire devices.
725 Zone Expanders Provides 24 VDC Class B powered zones for connecting smoke detectors, glassbreak
detectors,andother2-or4-wiredevices.Requires710FBusSplitter/Repeater.
716 Output Expander ProvidesfourFormCrelays(SPDT)andfourswitchedgrounds(opencollector)foruseina
variety of remote annunciation and control applications for use on the LX-Bus only.
717GraphicAnnunciatorModule Provides 20 zone following annunciator outputs (open collector) for use in a variety of
remote annunciation and control applications for use on the LX-Bus only.
733, 734 Wiegand Interface Module
Provides system codeless entry, and arming and disarming using access control readers.
CellCom Series Digital Cellular
Communicator
ProvidesafullysupervisedalarmcommunicationpathovertheGSM/GPRSnetwork.
DMP Two-Way Wireless Devices
1100X/*1100XH/*1100XI Wireless
Receiver
Supports up to 500 devices in residential or commercial wireless operation.
1101 Universal Transmitter Provides both internal and external contacts that may be used at the same time to yield
two individual reporting zones from one wireless transmitter.
1102 Universal Transmitter Provides an external contact.
*1114Four-ZoneExpander Provides four wireless zones
* 1116 Relay Output ProvidesoneFormCrelay
* 1117 LED Annunciator Provides a visual system status indicator
* 1118 Remote Indicator Light Provides a visual indication of a Panic situation
* 1121 PIR Motion Detector Provides motion detection with pet immunity.
1125 PIR Motion Detector Providesmultiplelenscongurations,dualcoverageareaselection,andsensitivity
adjustments.
*1129GlassbreakDetector Detects the shattering of framed glass mounted in an outside wall and provides full-pattern
coverage and false-alarm immunity.