Specifications

3.5 Switches
Network Modules 3–57
Platform
This full-height module is used in the:
• DEChub 900 MultiSwitch
• DEChub ONE
• DEChub ONE-MX.
Protocol
Ethernet 802.3 and FDDI
Media
Six total Ethernet ports (ST-type).
LAN Connectivity
• Each Ethernet port is independently assignable to either one DEChub 900 Multi-
Switch backplane ThinWire or flex channel, or to a dedicated front panel port.
Therefore any combination of backplane and front panel connections not
exceeding six is allowed. One FDDI logical rear backplane port.
• Any one front panel Ethernet port can be switched to the DEChub ONE AUI or
to the DEChub ONE-MX AUI. The FDDI port must be connected through the
FDDI logical port on the DEChub ONE-MX.
Upgrade Method
• Flash Loader
• TFTP via the Setup port.
Manageability
• Digital MultiStack System—Not installable.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent or through the integral hub management agent.
• DEChub 90—Not installable.
• DEChub ONE—Managed through the module’s built in SNMP agent.
• DEChub ONE-MX—Managed through the module’s built in SNMP agent.
• Standalone—Not installable.