Specifications

3.5 Switches
3–50 Network Modules
Platform
This full-height module is used in the:
• DEChub 900 MultiSwitch
• DEChub ONE
• DEChub ONE-MX.
Protocol
Ethernet 802.3
Media
Two AUI and a four 8-pin MJ.
LAN Connectivity
• Each Ethernet port is independently assignable to either one DEChub 900 Multi-
Switch backplane ThinWire or flex channel, or to a dedicated front panel port.
Therefore any combination of backplane and front panel connections not
exceeding six is allowed. Port 2 only can be connected to the backplane Thin-
Wire.
• The Standalone port 3 can be switched to the DEChub ONE AUI.
• The Standalone port 3 can be switched to the DEChub ONE-MX AUI.
Upgrade Method
• Flash Loader.
• TFTP via the Setup port.
Manageability
• Digital MultiStack System—Not installable.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent or through the integral hub management agent.
• DEChub 90—Not installable.
• DEChub ONE—Managed through the module’s built in SNMP agent.
• DEChub ONE-MX—Managed through the module’s built in SNMP agent.
• Standalone—Not installable.