Specifications

3.5 Switches
Network Modules 3–47
Platform
This full-height module is used in the:
• DEChub 900 MultiSwitch
• DEChub ONE
• DEChub ONE-MX.
Protocol
Ethernet 802.3 and FDDI.
Media
Six 8-pin MJ ports (either 100 ohm shielded or unshielded twisted-pair).
LAN Connectivity
• Up to six Ethernet connections on the DEChub 900 MultiSwitch flex channels.
One FDDI connection in the DEChub 900 MultiSwitch backplane. Port 3 can be
connected to the backplane ThinWire.
• One AUI when installed in a DEChub ONE.
• One AUI and one FDDI (modPMD) when installed in a DEChub ONE-MX.
Upgrade Method
• Flash Loader
• TFTP via the Setup port.
Manageability
• Digital MultiStack System—Not installable.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent or through the integral hub management agent.
• DEChub 90—Not installable.
• DEChub ONE—Managed through the module’s built in SNMP agent (if
installed, FDDI is unavailable).
• DEChub ONE-MX—Managed through the module’s built in SNMP agent.
• Standalone—Not installable.