Specifications

3.4 Bridges
Network Modules 3–43
Platform
This half-height module is used in the:
• Digital MultiStack System
• DEChub 900 MultiSwitch
• DEChub 90.
• When used standalone it requires a separate power unit.
Protocol
Ethernet 802.3
Media
One AUI or 10BaseFL/FOIRL.
LAN Connectivity
• One ThinWire BNC or one AUI when installed in the Digital MultiStack System
• One backplane ThinWire when installed in a DEChub 900 MultiSwitch.
• One backplane ThinWire when installed in a DEChub 90.
• One ThinWire BNC or one AUI when standalone.
Upgrade Method
MOP only.
Manageability
• Digital MultiStack System—Requires a proxy agent installed in the stack.
• DEChub 900 MultiSwitch—Requires a proxy agent installed in the chassis.
• DEChub 90—Requires a proxy agent installed in the chassis or on the LAN.
• DEChub ONE—Not installable.
• DEChub ONE-MX-Not installable.
• Standalone—Requires a proxy agent installed on the LAN.
Supported MIBs
– Ethernet MIB (RFC 1398)
– Bridge MIB (RFC 1493)