Specifications
3.2 Repeaters
Network Modules 3–23
• DEChub 90
• When used standalone it requires a separate power unit.
Protocol
Ethernet 802.3
Media
Two 10BaseFL/FOIRL-compliant using ST-type fiber optic connectors, and one
AUI.
LAN Connectivity
• One ThinWire BNC or one AUI when installed in the Digital MultiStack System
• Provides backplane access to a ThinWire segment and/or the flex channel in the
DEChub 900 MultiSwitch.
• One backplane ThinWire when installed in a DEChub 90.
• One ThinWire BNC or one AUI when installed standalone.
Upgrade Method
• Flash Loader
• TFTP via the Setup port.
Manageability
• Digital MultiStack System—Managed through the module’s built in SNMP
agent or the stack manager.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent or through the integral hub management agent.
• DEChub 90—Managed through the module’s built in SNMP.
• DEChub ONE—Not installable.
• DEChub ONE-MX—Not installable.
• Standalone—Managed through the module’s built in SNMP agent.
Supported MIBs
• Ethernet MIB (RFC 1398)
• Repeater MIB (RFC 1516)