Specifications

3.2 Repeaters
Network Modules 3–15
Media
Thirty two 8-pin MJ ports using either 100 ohm shielded or unshielded twisted-pair.
LAN Connectivity
• When installed in the DEChub 900 MultiSwitch, the module can be connected to
the ThinWire Ethernet LAN and/or any one of the six flex channels.
• One AUI when installed in the DEChub ONE or DEChub ONE-MX.
Upgrade Method
• Flash Loader
• TFTP via the Setup port
Manageability
• Digital MultiStack System—Not installable.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent or through the integral hub management agent.
• DEChub 90—Not installable.
• DEChub ONE—Managed through the module’s built in SNMP agent.
• DEChub ONE-MX—Managed through the module’s built in SNMP agent.
• Standalone—Not installable.
Supported MIBs
• Ethernet MIB (RFC 1398)
• Repeater MIB (RFC 1516)
• Digital Extended Repeater MIB
• DEChub 900 Public Common MIB
• MIB II (RFC 1213)
• RMON
– Alarms
–Events