Specifications

3.2 Repeaters
Network Modules 3–9
Media
Eight 8-pin MJ unshielded twisted-pair (UTP) connectors.
LAN Connectivity
• One ThinWire BNC when installed in Digital MultiStack System
• Backplane access to a ThinWire segment and/or the flex channel when installed
in a DEChub 900 MultiSwitch.
• One backplane ThinWire when installed in a DEChub 90.
• One ThinWire BNC or one AUI (requires the back cover) when standalone.
Upgrade Method
• Flash Loader.
• TFTP via the setup port.
Manageability
• Digital MultiStack System—Managed through the module’s built in SNMP
agent or through the stack manager.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent or through the integral hub management agent.
• DEChub 90—Managed through the module’s built in SNMP agent.
• DEChub ONE—Not installable.
• DEChub ONE-MX—Not installable.
• Standalone—Managed through the module’s built in SNMP agent
Supported MIBs
• Ethernet MIB (RFC 1398)
• Repeater MIB (RFC 1516)
• Digital Extended Repeater MIB
• DEChub 900 Public Common MIB
• MIB II (RFC 1213)
IP Service
Provides IP Services.