Specifications

1.6 DEChub ONE-MX
1–10 Platforms
1.6 DEChub ONE-MX
The DEChub ONE-MX is a single-slot hub that provides standalone capability for
full-height network modules. An attachment unit interface (AUI) on the DEChub
ONE-MX can connect an attached network module to a standard Ethernet backbone.
An optional medium attachment unit (MAU) can be connected to the DEChub ONE-
MX AUI to connect it to a fiber-optic, ThinWire, or twisted-pair Ethernet LAN.
Using the optional Single-Mode Fiber (SMF), Multimode Fiber (MMF), or Twisted
Pair (TWP) Modular Physical Media Dependent (ModPMD) cards, the DEChub
ONE-MX can connect to an FDDI network via its A and B ports. Figure 1–5 displays
the DEChub ONE MX.
The DEChub ONE-MX provides an out-of-band management (OBM) port with an
associated LED for remote network management support. A setup port on the
DEChub ONE-MX enables you to configure the attached network module using a
terminal device, personal computer, or terminal.
The DEChub ONE-MX is designed to provide power-failover capability, and can be
configured into a redundant power system (optional kit required).
It includes a 6-pin MJ optical bypass relay port for connecting to an OBR device.
The DEChub ONE-MX can also be used to supply power to Token Ring modules.
Features
• Enables full-height network modules to operate as standalone devices.
• Suitable for desktop or rack-mounting.
• Can connect to an Fiber Distributed Data Interface (FDDI).
• Supports FDDI optical bypass relay (OBR) feature.
• Supports Simple Network Management Protocol (SNMP) using the Serial Line
Internet Protocol (SLIP).