Specifications

1.4 Digital MultiStack System
Platforms 1–7
1.4 Digital MultiStack System
The Digital MultiStack System is a stackable hub system that allows you to use
repeaters, internetworking, wireless, LAN monitoring, and management modules in
stackable network configurations. The Digital MultiStack System can stack up to
sixteen modules, commonly referred to as half-height modules. It can be rack
mounted in a standard 19-inch rack, or distributed throughout a building. Figure 1–3
displays the Digital MultiStack System with modules installed.
Figure 1–3 Digital MultiStack System
In the Digital MultiStack System sixteen network modules can be managed as a
single SNMP management domain using network management software. In addition,
the same network modules are easily removed from the Digital MultiStack System
for use in a DEChub 90 or DEChub 900.
The Digital MultiStack System supports and provides hot-swap capability for any
module in a stacking unit. The stacking unit comes with a stackable backplane,
power supply, and ThinWire and Unshielded Twisted Pair management cables.