Specifications

3.10 Management Agents
3–92 Network Modules
• When used standalone it requires a separate power unit.
Protocol
Ethernet 802.3
Media
Not applicable
LAN Connectivity
• One ThinWire BNC when installed in the Digital MultiStack System.
• One backplane ThinWire when installed in a DEChub 900 MultiSwitch.
• One backplane ThinWire when installed in a DEChub 90.
• One ThinWIre BNC when standalone.
Upgrade Method
• Flash Loader
• TFTP via the Setup port.
Manageability
• Digital MultiStack System—Managed through the module’s built in SNMP
agent.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent.
• DEChub 90—Managed through the module’s built in SNMP agent.
• DEChub ONE—Not installable.
• DEChub ONE-MX—Not installable.
• Standalone—Managed through the module’s built in SNMP agent.
Supported MIBs
• DEChub 90 MIB
• Ethernet MIB (RFC 1398)
• DEChub 900 Public Common MIB
• MIB II (RFC 1213)