Specifications

3.9 Network Access Servers
Network Modules 3–89
• DEChub ONE
• DEChub ONE-MX.
Protocol
Ethernet 802.3
Media
Four “bulk” connectors (68 pin high density).
LAN Connectivity
• When installed in the DEChub 900 MultiSwitch, the module can be connected to
the ThinWire Ethernet LAN and/or any one of the six flex channels.
• One AUI when installed in the DEChub ONE or DEChub ONE-MX.
Upgrade Method
• Downline load at each power up. Nonvolatile flash memory is optional. If
present, may be reprogrammed via BOOTP/TFTP. Update initiated via a physi-
cal console terminal, Telnet remote console, or DEChub 900 MultiSwitch Setup
port.
Manageability
• Digital MultiStack System—Not installable.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent.
• DEChub 90—Not installable.
• DEChub ONE—Managed through the module’s built in SNMP agent.
• DEChub ONE-MX—Managed through the module’s built in SNMP agent.
• Standalone—Not installable.
Supported MIBs
• Ethernet MIB (RFC 1398)
• DEChub 900 Public Common MIB
• MIB II (RFC 1213)
• AppleTalk MIB (RFC 1243)