Specifications

3.9 Network Access Servers
3–86 Network Modules
• DEChub ONE-MX.
Protocol
Ethernet 802.3
Media
Thirty-two 8-pin MJ, either shielded or unshielded twisted-pair.
LAN Connectivity
• When installed in the DEChub 900 MultiSwitch, the module can be connected to
the ThinWire Ethernet LAN and/or any one of the six flex channels.
• One AUI when installed in the DEChub ONE or DEChub ONE-MX.
Upgrade Method
• Flash RAM is optional. If present, may be reprogrammed via BOOTP/TFTP.
Update initiated via a physical console terminal, Telnet remote console, or
DEChub 900 MultiSwitch Setup port. Fall back to downline load at power up.
Manageability
• Digital MultiStack System—Not installable.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent.
• DEChub 90—Not installable.
• DEChub ONE—Managed through the module’s built in SNMP agent.
• DEChub ONE-MX—Managed through the module’s built in SNMP agent.
• Standalone—Not installable.
Supported MIBs
• Ethernet MIB (RFC 1398)
• DEChub 900 Public Common MIB
• MIB II (RFC 1213)
• AppleTalk MIB (RFC 1243)
• Character MIB (RFC 1316)
• RS232-Like MIB (RFC 1317)