Specifications

3.9 Network Access Servers
3–76 Network Modules
Platform
This half-height module is used in the:
• Digital MultiStack System
• DEChub 900 MultiSwitch
• DEChub 90
• When used standalone it requires a separate power unit.
Protocol
Ethernet 802.3
Media
Eight 8-pin MJ8 connectors.
LAN Connectivity
• One ThinWire BNC when in the Digital MultiStack System.
• One backplane ThinWire when installed in a DEChub 900 MultiSwitch.
• One backplane ThinWire when installed in a DEChub 90.
• One ThinWire BNC when standalone.
Upgrade Method
• RAM only. Downline load at each power up.
Manageability
• Digital MultiStack System—Managed through the module’s built in SNMP
agent.
• DEChub 900 MultiSwitch—Managed through the module’s built in SNMP
agent
• DEChub 90—Managed through the module’s built in SNMP agent.
• DEChub ONE—Not installable.
• DEChub ONE-MX—Not installable.
• Standalone—Managed through the module’s built in SNMP agent.