User manual

Kontron Compact Computers AG SMX945 Condensed Manual V1.1

1. PREFACE

The information contained in this manual has been carefully checked and is believed to be accurate; it is

subject to change without notice. Product advances mean that some specifications may have changed.

Kontron AG assumes no responsibility for any inaccuracies, or the consequences thereof, that may appear

in this manual. Furthermore, Kontron AG does not accept any liability arising from the use or application of

any circuit or product described herein.

1.1. Trademarks

MICROSPACE

, smartModule

, smartCore

Express and DIGITAL-LOGIC

are trademarks or registered

trademarks of Kontron Compact Computers AG. Kontron is a trademark or registered trademark of Kontron

AG. In addition, this document may include names, company logos, and registered trademarks which are,

therefore, proprietary to their respective owners.

1.2. Disclaimer

Kontron Compact Computers (KCC) makes no representations or warranties with respect to the contents of

this manual, and specifically disclaims any implied warranty of merchantability or fitness, for any particular

purpose. KCC shall, under no circumstances, be liable for incidental or consequential damages or related

expenses resulting from the use of this product, even if it has been notified of the possibility of such damage.

1.3. Environmental Protection Statement

This product has been manufactured to satisfy environmental protection requirements wherever possible.

Many of the components used (structural parts, printed circuit boards, connectors, batteries, etc.) are

capable of being recycled. Final disposal of this product after its service life must be accomplished in

accordance with applicable country, state, or local laws or regulations.

1.4. Who should use this Product

 Electrical engineers with know-how in PC-technology.

 Because of the complexity and the variability of PC-technology, we cannot guarantee that the product

will work in any particular situation or set-up. Our technical support will try to help you find a solution.

 Pay attention to electrostatic discharges; use a CMOS protected workplace.

 Power supply must be OFF when working on the board or connecting any cables or devices.