Specifications
smartModule Express SMX945 / Software
www.kontron.com 37
MSDOS application remSMX945.exe
The remote console application must be loaded and connected before the BIOS start on the remote computer. The
supported option"Floppy…" must be chosen before connecting. The remote application simulates floppy disk access
over the "floppy image file"; this image file can be modified with, for example, WinImage software
http://www.winimage.com/winimage.htm. It is also possible to use Flimfex11.exe from Kontron Compact Computers'
remote software package. (Flimfex = floppy image file explorer)
R – this button sends a request to the remote computer TSR routine to refresh on-screen information on the host
computer.
Options for an MSDOS application can be changed in the REMSM945.INI file.
PORT=1: Use COM1 for remote control on the host computer.
FLOPPY=FREEDOS2.IMG: Enable remote floppy and use FREEDOS2.IMG image file for floppy disk emulation.
Note: All remote features are supported only under FREEDOS or MSDOS 6.22.
7.2.4 Hardware Settings on the Remote Computer
To enable a remote COM port for remote control:
1. Press DEL at boot time to enter the BIOS setup
2. Enter "Advanced"
3. Enter "Remote Access Configuration"
4. Set COM port parameters and required protocol parameters
Note: On the host side, it is possible to use any terminal emulation software which supports PC ANSI or VT100
protocol.