Specifications

smartModule Express SMX945 / Driver Installation
www.kontron.com 22
2. Press the <Z> key to specify an additional device.
3. Insert the floppy disk containing the driver files when you see the following prompt: "Please insert the disk
labeled Manufacturer-supplied hardware support disk into Drive A:" and press the <Enter> key. Refer to
Automatic F6 Floppy Creation for instructions.
4. Select the "Intel
®
82801GHM SATA RAID Controller (Mobile ICH7MDH)" entry and press the <Enter> key.
Note: Not all available selections may appear in the list; use the < ↑ > or < ↓ > to see additional options.
5. Press the <Enter> key to confirm.
At this point, you have successfully F6 installed the Intel
®
Matrix Stoage Manager driver and Windows XP setup should
continue. Leave the floppy disk in the floppy drive until the system reboots itself because the Windows setup will need
to copy the files again from the floppy to the Windows installation folders. After Windows setup has copied these files
again, remove the floppy diskette so that Windows setup can reboot as needed.