Specifications

smartModule Express SMX945 / Driver Installation
www.kontron.com 20
8. Select the volume capacity and press the <Enter> key.
Note: The default value indicates the maximum volume capacity using the selected disks. If less than the maximum
volume capacity is chosen, creation of a second volume is needed to utilize the remaining space (i.e., a
matrix RAID configuration).
9. At the Create Volume prompt, press the <Enter> key to create the volume. The following prompt will appear:
10. Press the <Y> key to confirm volume creation.
11. To exit the option ROM user interface, select option 5. Exit and press the <Enter> key.
12. Press the <Y> key again to confirm exit.
Note: To change any of the information before the volume creation has been confirmed, you must exit the Create
Volume process and restart it. Press the <Esc> key to exit the Create Volume process.