User manual

Kontron Compact Computers AG SMX945 Detailed Manual V1.1
66
Configure USB keyboard/mouse to be able to wake up the system:
In Device Manager look for the keyboard/mouse devices. Go to the Power Management tab and check
“Allow this device to bring the computer out of standby”.
Note…
When the standby state is set to S3 in the ACPI setup menu, the power management tab for USB
keyboard /mouse devices only becomes available after adding the registry entry (see the table on
previous page) and rebooting to allow the registry changes to take affect.
8.4. PCI Resources
Addressing PCI devices on the SMX945:
DEVICE IDSEL PIRQ #REG #GNT Remarks
Internal Chipset PCI devices and resources
GMCH internal --- --- PCI Bus 0
PEG Controller internal --- --- PCI Bus 0
Graphics Controller internal --- --- PCI Bus 0
ICH7_USB Controller Internal --- --- PCI Bus 0
Func 0 = USB0 mapped to PIRQH
Func 1 = USB1 mapped to PIRQD
Func 2 = USB2 mapped to PIRQC
Func 3 = USB3 mapped to PIRQA
Func 7 = USB2.0 mapped to PIRQH
ICH7_HUB Controller internal --- --- PCI Bus 0
AC97 Audio mapped to PIRQB
AC97 Modem mapped to PIRQE
ICH7_LPC Controller --- --- PCI Bus 0
IDE mapped to PIRQC
SATA mapped to PIRQD
SMBUS mapped to PIRQD
CHAP mapped to PIRQA
ICH7_AZALIA Controller internal PCI Bus 0
ICH7_PCIE Controller internal --- --- PCI Express Ports 1-4
Slot1 mapped to PIRQB
Slot2 mapped to PIRQA
Slot3 mapped to PIRQC
Slot4 mapped to PIRQD
Network internal
AD24
--- --- PCI Bus 6
Internal chipset onboard device
External PCI slots
PC/104+ Slot 1 AD20 E / F / G / H 0-4 0-4 PCI Bus 6
PC/104+ Slot 2 AD21 F / G / H / E 0-4 0-4 PCI Bus 6
PC/104+ Slot 3 AD22 G / H / E / F 0-4 0-4 PCI Bus 6
PC/104+ Slot 4 AD23 H / E / F / G 0-4 0-4 PCI Bus 6