User manual

Kontron Compact Computers AG SMX945 Detailed Manual V1.1
25
5. LED CRITERIA:
LED Color Function
D26 Green Run OK
D31 Green 3.3Volt OK
The Power & Control LEDs on the SMX945PC
There are 2 LEDs located on the top side of the smartModule:
1. The green Power LED
a. Indicates that the 3.3V core supply for the CPU is OK.
b. This LED must light as soon as the external 5V power supply is available.
2. The green Reset/Run LED
OFF: The module is in the Reset state which means there is no operation.
Either the Watchdog, the power supervisor or an active external reset signal holds the module
in the Reset state.
ON: The module is running normally.
After power up, this LED must come ON after 1-2 seconds.
After a successful boot sequence, both green LEDs are on!