Specifications

smartCore Express SMA200 BIOS / Driver Installation
www.kontron.com 16
3. Insert the floppy disk containing the driver files when you see the following prompt: "Please insert the disk
labeled Manufacturer-supplied hardware support disk into Drive A:" and press the <Enter> key. Refer to
Automatic F6 Floppy Creation for instructions.
4. Select the "Silicon Image SiI 3132 SATALink Controller for Windows XP/Server2003" entry and press the
<Enter> key.
5. Press the <Enter> key to confirm.
At this point, you have successfully F6 installed the Silicon Image SATA driver and Windows XP setup should continue.
Leave the floppy disk in the floppy drive until the system reboots itself because the Windows setup will need to copy
the files again from the floppy to the Windows installation folders. After Windows setup has copied these files again,
remove the floppy diskette so that Windows setup can reboot as needed.