User manual
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7
2
For internal use only:
File: MSM800SEV-SEL_Detailed_V1.7.doc
Path: R:\HANDBUCH\MSM\cpu_boards\MSM800\MSM800SEV-SEL_Detailed_V1.7.doc
COPYRIGHT
2008 BY DIGITAL-LOGIC AG
This publication is protected by copyright and all rights are reserved. No part of this document may be
reproduced, transmitted, transcribed or stored in a retrieval system, in any form or by any means, electronic,
mechanical, optical, manual, or otherwise, without the prior written permission of DIGITAL-LOGIC AG.
The software described herein, together with this document, are furnished under a license agreement and
may be used or copied only in accordance with the terms of that agreement.
About this Manual and How to Use It
This manual is written for the original equipment manufacturer (OEM) who plans to build computer systems
based on the single board MICROSPACE-PC. It is for integrators and programmers of systems based on the
MICROSPACE-Computer family. This manual provides instructions for installing and configuring the board,
and describes the system and setup requirements. This document contains information on hardware
requirements, interconnections, and details of how to program the system. Please check the Product CD for
further information and manuals.
REVISION HISTORY:
Document
Version
Date/Initials: Modification:
Remarks, News, Attention:
V0.1 02.2006 KUF Initial Version
V0.2/V0.3 03.2006 DAR Preliminary Version 1 / Preliminary Version 2
V0.4 06.2006 DAR Preliminary Version 3
V1.0 07.2006 DAR Final Release
V1.0A 07.2006 DAR LCD connector / Flat Panel description
V1.0B 08.2006 DAR Minor corrections, BIOS update
V1.1 10.2006 DAR System I/O Map / Index structure, Board Version 2.1
V1.1A 11.2006 DAR BIOS V1.12, misc drawings
V1.1B 12.2006 DAR Front Picture, BIOS V1.13
V1.2 02.2007 DAR BIOS V1.14, other board versions added (not complete)
V1.2A 03.2007 DAR Power Mgt / BIOS Setup pictures
Serial Port Remote Control
V1.3 04.2007 KUF General Doc Revision/Preface additions
V1.4 05.2007 WAS/DAR
KUF
Revision History format change / Filename & Path moved
Previous product versions chapter added
“Ext. battery connect & onboard battery removed” warning added
V1.5 06.2007 DAR/WAS Jumper7 Section 7.1 added w/Note for BIOS boot up Section 4.7.3
V1.6 07.2007 WAS VGA monitor signals updated / XEV&XEL thermoscans added
V1.6A 08.2007 DAR MSM800XEV/XEL BIOS History added
V1.6B 12.2007 SEP/WAS ACPI S3 (Suspend to RAM) not available; available PCI slots (3 vs 4);
Jumpers clarified; 1.12 & 1.13 added / Chapter 10
V1.6C 02.2008 DAR Chapter 10 / Heat sink options updated per Solution Guide 2008 / BIOS
V1.24 added
V1.6D 03.2008 DAR Mechanical Drawings
V1.6E 09.2008 DAR Chapter 2.6
V1.6F 10.2008 DAR ??
V1.7 08.2009 MEG/WAS
Jumpers J6 & J7 "Remarks" / LANCON info / Power conn. pin diagram
Attention!
1. All information in this manual, and the product, are subject to change without prior notice.
2. Read this manual prior to installation of the product.
3. Read the security information carefully prior to installation of the product.