User manual
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7
18
Operating Environment
Relative humidity 5-90% non-condensing
Vibration 5 to 2000Hz, 0.1G
Shock 1 G
Temperature
MSM800SEV/SEL
Operating standard version:
Without heat sink: 0°C to +60°C
With small heat sink 807041: -25°C to +70°C
Operating extended version:
Not possible
MSM800BEV
Operating standard version:
Without heat sink: 0°C to +60°C
With small heat sink 807041: -25°C to +70°C
Operating extended version:
With large heat sink 807042 + E48: -40°C to +85°C
With thermojunction + E48: -40°C to +85°C
MSM800XEV/XEL
Operating standard version:
Without heat sink: 0°C to +60°C
With small heat sink 807041: -25°C to +70°C
Operating extended version:
With large heat sink 807042 + E47: -40°C to +70°C
With thermojunction + E48: -40°C to +85°C
EMI / EMC (IEC1131-2 refer MIL 461/462)
ESD Electro Static Discharge IEC 801-2, EN55101-2, VDE 0843/0847 Part 2
Metallic protection needed
Separate ground layer included
15 kV single peak
REF Radiated Electromagnetic Field IEC 801-3, VDE 0843 Part 3, IEC770 6.2.9. (not tested)
EFT Electric Fast Transient (Burst) IEC 801-4, EN50082-1, VDE 0843 Part 4
250V - 4kV, 50 ohms, Ts=5ns
Grade 2: 1kV Supply, 500 I/O, 5kHz
SIR Surge Immunity Requirements IEC 801-5, IEEE587, VDE 0843 Part 5
Supply: 2kV, 6 pulse/minute
I/O: 500V, 2 pulse/minute
FD, CRT: none
High-frequency Radiation EN55022
Compatibility
MSM800SEV/BEV/XEV/SEL/BEL/XEL Mechanically compatible to our MSMx86 Boards and to all
other PC/104 boards
All information is subject to change without notice.