User manual

DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7
116
J16 Sound/Audio Port
Pin Signal Pin Signal
1 Input_CD_L 2 GND
3 Input_CD_R 4 Input_AUX_L
5 GND 6 Input_AUX_R
7 Input_Line_L 8 GND
9 Input_Line_R 10 GND
11 Input_MIC 1 12 GND
13 Input_MIC 2 14 Input Mono
15 Output Front / Line Left 16 GND
17 Output Front / Line Right 18 GND
19 Output Surround Left 20 GND
21 Output Surround Right 22 GND
23 Output_Center 24 GND
25 Output_Subwoofer 26 GND
27 SPDIF Digital Output 28 Jack Sense 0 Input
29 Jack Sense 1 Input 30 Jack Sense 2 Input
J17 10/100 BASE-T interface Connector
Pin * Signal
1 TX-
2 TX+
3 RX-
4 RX+
5 Activity LED
6 BAT input 3.0-3.6V
7 GND
8 VCC 3.3V
9 Speed LED
10 Link LED
At J17, for earlier board versions, the LAN-Interface board including the LAN-transformer and the Lithium
RTC-Battery (for backup), must be connected. Starting with SEV/SEL V2.1, XEV/XEL V0.1 and BEV V1.0,
the LAN transformer and battery are integrated on the MSM800 product.