DETAILED TECHNICAL USER MANUAL FOR: PC/104 plus MSM800SEV/SEL MSM800BEV MSM800XEV/XEL Nordstrasse 11/F CH - 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 For internal use only: File: Path: MSM800SEV-SEL_Detailed_V1.7.doc R:\HANDBUCH\MSM\cpu_boards\MSM800\MSM800SEV-SEL_Detailed_V1.7.doc COPYRIGHT 2008 BY DIGITAL-LOGIC AG This publication is protected by copyright and all rights are reserved.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Table of Contents 1. PREFACE........................................................................................................................5 1.1. Trademarks ..................................................................................................................................... 5 1.2. Disclaimer ...............................................................................................................................
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 5.3.1. CPUs of this MICROSPACE Product .................................................................................... 48 5.3.2. Numeric Coprocessor ............................................................................................................ 48 5.3.3. DDRAM Memory on MSM800SEV/SEL/BEV/BEL................................................................ 48 5.3.4. DDRAM Memory on MSM800XEV/XEL ...............................
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 1. PREFACE The information contained in this manual has been carefully checked and is believed to be accurate; it is subject to change without notice. Product advances mean that some specifications may have changed. DIGITAL-LOGIC AG assumes no responsibility for any inaccuracies, or the consequences thereof, that may appear in this manual.
DIGITAL-LOGIC AG 1.5. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Recycling Information All components within this product fulfill the requirements of the RoHS (Restriction of Hazardous Substances Directive). The product is soldered with a lead free process. 1.6. Technical Support 1. Contact your local DIGITAL-LOGIC Technical Support, in your country. 2. Use the Internet Support Request form at http://support.digitallogic.
DIGITAL-LOGIC AG 1.8. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them. Failure to observe the precautions indicated and/or prescribed by the law may endanger your life/health and/or result in damage to your equipment.
DIGITAL-LOGIC AG 1.9. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Applicable Documents and Standards The following publications are used in conjunction with this manual. When any of the referenced specifications are superseded by an approved revision, that revision shall apply. All documents may be obtained from their respective organizations. Advanced Configuration and Power Interface Specification Revision 2.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Smart Battery Data Specification Revision 1.1, December 11, 1998. www.sbs-forum.org System Management Bus (SMBus) Specification Version 2.0, August 3, 2000 Copyright © 1994, 1995, 1998, 2000 Duracell, Inc., Energizer Power Systems, Inc., Fujitsu, Ltd., Intel Corporation, Linear Technology Inc., Maxim Integrated Products, Mitsubishi Electric Semiconductor Company, PowerSmart, Inc., Toshiba Battery Co. Ltd.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 RoHS is often referred to as the "lead-free" directive but it restricts the use of the following substances: Lead Mercury Cadmium Chromium VI PBB and PBDE The maximum allowable concentration of any of the above mentioned substances is 0.1% (except for Cadmium, which is limited to 0.01%) by weight of homogeneous material.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 1.12. Swiss Quality 100% Made in Switzerland DIGITAL-LOGIC is a member of "Swiss-Label" This product was not manufactured by employees earning piecework wages This product was manufactured in humane work conditions All employees who worked on this product are paid customary Swiss market wages and are insured ISO 9000:2001 (quality management system) 1.13.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 2. OVERVIEW 2.1. Standard Features The MICROSPACE PC/104 is a miniaturized modular device incorporating the major elements of a PC/AT compatible computer. It includes standard PC/AT compatible elements, such as: 2.2.
DIGITAL-LOGIC AG 2.5. 2.5.1. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG 2.5.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG 2.5.3. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG 2.6. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800 SEV/SEL, BEV/BEL, XEV/XEL Specifications CPU CPU CPU Core Supply Mode Compatibility Word Size Secondary Cache Physical Addressing Virtual Addressing Clock Rates Socket Standard Geode LX800 1.8V very low powered Real/Protected 8086 – P5 32bits – 32 lines 16GBytes 500MHz Soldered BGA Chipset Northbridge Southbridge LAN Audio Firewire IEEE1394 Video AMD LX800 AMD 5536 10/100MBit Intel 82C551ER AC97 – V2.
DIGITAL-LOGIC AG Mass Storage FD: HD: Standard AT Interfaces Serial Parallel Keyboard Mouse Speaker RTC Backup current Non-chargeable Battery MSM800SEV/BEV/XEV MSM800SEL/BEL/XEL BUS PC/104plus MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Floppy disk interface, for max. 1 floppy with 26pin connector E-IDE interface, AT-type, for max. 2 hard disks, 44pin connector, for 1.3, 1.8 and 2.5" hard disks with 44 pins IDE Name FIFO IRQs Addr.
DIGITAL-LOGIC AG Operating Environment Relative humidity Vibration Shock Temperature MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 5-90% non-condensing 5 to 2000Hz, 0.
DIGITAL-LOGIC AG 2.7. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Examples of Ordering Codes Part / Option MSM800SEL MSM800SEV MSM800BEV MSM800XEL Part Nr.
DIGITAL-LOGIC AG 2.8. 2.8.1. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Dimensions and Diagrams MSM800SEV/SEL/BEV/XEV/XEL Board / Version MSM800SEV/BEV V2.1 Unit: mm (millimeter) Tolerance: + / - 0.1mm Board Dimensions 20 Date / Author 19.03.
DIGITAL-LOGIC AG Board / Version MSM800XEV MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Unit: mm (millimeter) Tolerance: + / - 0.1mm 21 Date / Author 19.03.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG 2.8.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800LVDSCON Board / Version Unit: MSM800-LVDSCON V0.1 mm (millimeter) Tolerance: + / - 0.1mm 32 Date / Author 25.10.
DIGITAL-LOGIC AG 2.8.3. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800DVICON Board / Version MSM800-DVICON V0.1 Unit: mm (millimeter) Tolerance: + / - 0.1mm 33 Date / Author 25.10.
DIGITAL-LOGIC AG 2.8.4. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800CON Board / Version MSM800-CON V1.0 Unit: mm (millimeter) Tolerance: + / - 0.1mm 34 Date / Author 25.10.
DIGITAL-LOGIC AG 2.9. 2.9.1. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800SEV/SEL Incompatibilities to a Standard PC/AT PC104 BUS / ISA BUS An onboard LPC to ISA-bridge makes it possible to expand the functionality of the board with additional PC/104 cards. Unfortunately, because of the transformation from LPC to ISA it is not possible to realize a 16bit access. This does not mean that these cards cannot be used, but that the 16bit access is divided into two.
DIGITAL-LOGIC AG 2.9.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 ISA-Incompatibility with ISA-PCCARD-Controller Experience shows that ATA-Drives controlled in an ISA-PCMCIA Controller do not work. Solution: Use a PCCARD-Controller on the PCI-Bus 2.9.3. ISA-Incompatibility with 16bit I/O Transfer with FPGA-Decoder Our experience shows that 16bit I/O-transfers decoded with a FPGA do not always work correctly. Each case must be tested. Expect problems on odd addresses.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 2.11. Thermoscan MSM800SEV V1.2 with small heat sink (OS: MSDOS promt) t [min] 45 fCPU [MHz] P01 [°C] 500 61.9 P02 [°C] 52.1 R11 [°C] 56.2 R12 [°C] 62.6 MSM800SEV V2.1 with small heat sink (OS: MSDOS promt) t [min] 90 fCPU [MHz] P01 [°C] 500 53.1 R11 [°C] 60.5 R12 [°C] 51.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800XEV V1.0 with small heat sink t [min] 60 fCPU [MHz] R11 [°C] 500 47.1 R12 [°C] 53.8 MSM800XEL V1.0 t [min] 60 fCPU [MHz] P01 [°C] 500 54.2 R11 [°C] 53.7 R12 [°C] 49.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 2.12. High Frequency Radiation (to meet EN55022) Since the PC/104 CPU modules are very highly integrated embedded computers, peripheral lines are not protected against radiation from the high frequency spectrum. To meet a typical EN55022 requirement, all peripherals that go outside of the computer case must be externally filtered.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 2.13. Battery Lifetime Note... The RTC back-up battery is assembled onboard only for the MSM800SEV/BEV/XEV systems. Battery specifications Lowest temp. -40°C Nominal temp. +20°C Manufacturer pba Type ER10280 Capacity versus temp. 10uA 430mAh 400mAh Voltage versus temp. 10uA 3.6V 3.6V Nominal values 3.6V / 400mAh @ 0.5mA / -55°C...~+85°C Information is taken from the datasheet.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 3. BUS SIGNALS 3.1. PC104 Bus Note... Not all of the signals are available on this board (please see Chapter 7 for a description of the connectors). AEN, output Address Enable: used to degate the microprocessor and other devices from the I/O channel to allow DMA transfers to take place.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 IRQ [10, 12, 14, 15], input These signals are used to tell the microprocessor that an I/O device needs attention. An interrupt request is generated when an IRQ line is raised from low to high. The line must be held high until the microprocessor acknowledges the interrupt request. /Master, input This signal is used with a DRQ line to gain control of the system.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 /SMEMR, input/output These signals instruct the memory devices to drive data onto the data bus for the first MByte. /SMEMR is active on all memory read cycles. /SMEMR may be driven by any microprocessor or DMA controller in the system. When a microprocessor on the I/0 channel wishes to drive /SMEMR, it must have the address lines valid on the bus for one system clock period before driving /SMEMR active. The signal is active low.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 FRAME* Frame is driven by the current master to indicate the start of a transaction and will remain active until the final data cycle. TRDY* Target Ready indicates the selected device’s ability to complete the current data cycle of the traansaction. Both IRDY* and TRDY* must be asserted to terminate a data cycle. IRDY* Initiator Ready indicates the master’s ability to complete the current data cycle of the transaction.
DIGITAL-LOGIC AG 3.3. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Expansion Bus The bus currents are as follows: Output Signals D0-D16 A0-A23 MR, MW, IOR, IOW, RES, ALE, AEN, C14 DACKx, DRQx, INTx, PSx, OPW IOH 8 mA 8 mA 8 mA 8 mA IOL 8 mA 8 mA 8 mA 8 mA Output Signals Logic Family ABT-Logic ViH (min.) = 2.15 V Voltage ABT-Logic Vil (max.) = 0.85 V Input Signals: 3.4. 3.4.1. Addressing PCI Devices MSM800SEV/SEL V2.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 4. BIOS HISTORY This BIOS history is for the MSM800XEV/XEL. This BIOS history is not for the following products: MSM800SEV/SEL, MSM800BEV, MPCV800, MSEP800, SM800 Version 1.22 1.24 Date 09.2007 02.2008 Status Initial Release Modifications E47 support Memory problem solved (XEV/XEL incorporated to the standard LX800 BIOS V1.24) Note… This product has a unique BIOS version.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 5. DETAILED SYSTEM DESCRIPTION This system has a system configuration based on the ISA architecture. Check the I/O and the Memory maps in this chapter. 5.1. Power Requirements The power is connected through the PC/104 power connector; or the separate power connector on the board. The supply uses only +5Volts and a ground connection.
DIGITAL-LOGIC AG 5.3. 5.3.1. CPU, Boards and RAMs CPUs of this MICROSPACE Product Processor GEODE LX800 5.3.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Type National Clock 500MHz Numeric Coprocessor The numeric coprocessor is always integrated into the Pentium CPUs. 5.3.3. Speed Size Bits Capacity Bank 5.3.4. Speed Size Bits Capacity Bank 5.4. 5.4.1.
DIGITAL-LOGIC AG 5.4.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Line Printer Port LPT1 A standard bi-directional LPT port is integrated into the MICROSPACE PC. Further information about these signals is available in numerous publications, including the IBM technical reference manuals for the PC and AT computers and from other reference documents. The current is: 5.4.3. IOH = 12mA IOL = 24mA Serial Ports COM1-COM2 The serial channels are fully compatible with 16C550 UARTS.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Floppy Disk Interface Technology Only CMOS drives are supported. This means the termination resistors are 1 KOhm and 5 1/4“-drives are not recommended (TTL interface). The 26pin connector: FFC/FPC 0.3mm thick 1.0mm (0.039") pitch (MOLEX 52030 Series) Floppy Disk Interface Connector: FD26: Pin 1 2 3 4 5 6 10 12 14 16 17 18 19 20 21 22 23 24 25 26 5.4.5.
DIGITAL-LOGIC AG 5.5. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Controllers 5.5.1. Interrupt Controllers An 8259A compatible interrupt controller, within the chipset, provides seven prioritized interrupt levels. Of these, several are normally associated with the board's onboard device interfaces and controllers, and several are available on the AT expansion bus. Interrupt IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10 IRQ11 IRQ12 IRQ13 IRQ14 IRQ15 5.6. 5.6.1.
DIGITAL-LOGIC AG 5.6.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 RTC (Real Time Clock) An AT compatible date/time clock is located within the chipset. The device also contains a CMOS static RAM, compatible with that in standard ATs. System configuration data is normally stored in the clock chip's CMOS RAM in a manner consistent with the convention used in other AT compatible computers. Connect an external Lithium battery to X33 pin6 (or use the mounted battery).
DIGITAL-LOGIC AG 5.7. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 BIOS 5.7.1. Core BIOS download 5.7.1.1. Before downloading a BIOS Please read through this section carefully and prepare for the download. Make a bootable diskette which includes the following files: Flashrom.com core BIOS xxxxxxxx.yyy Important... Do not use boot disks created in a Windows operating system. If you do not have an MSDOS 6.22 disk available, you can download a boot disk from www.bootdisk.com.
DIGITAL-LOGIC AG 5.7.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 ROM-BIOS Sockets An EPROM socket with 8bit wide data access normally contains the board’s AT compatible ROM-BIOS. The socket takes a 29F020 EPROM (or equivalent) device. The board's wait-state control logic automatically inserts four memory wait states in all CPU accesses to this socket.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 The following table provides a summary of how these areas may be further divided.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 CMOS Map continued...
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 CMOS Map continued...
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 CMOS Map continued...
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 CMOS Map continued...
DIGITAL-LOGIC AG 5.9. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 EEPROM saved CMOS Setup The EEPROM has different functions, as listed below: Backup of the CMOS-Setup values. Storing system information (i.e., version, production date, customization of the board, CPU type). Storing user/application values. The EEPROM will be updated automatically after exiting the BIOS setup menu. The system will operate also without any CMOS battery.
DIGITAL-LOGIC AG 5.9.1. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 EEPROM Memory for Setup The EEPROM is used for setup and configuration data, stored as an alternative to the CMOS-RTC. Optionally, the EEPROM setup driver may update the CMOS RTC, if the battery is running down and the checksum error would appear and stop the system. The capacity of the EEPROM is 2 kByte.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 5.10.2. System I/O Map The following table details the legacy I/O range for 000h through 4FFh. Each I/O location has a read/write (R/W) capability. Note the following abbreviations: --- Unknown or cannot be determined. Yes Read and write the register at the indicated location. No shadow required. WO Write only. Value written can not be read back. Reads do not contain any useful information. RO Read only. Writes have no effect.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 I/O Map Continued… I/O Addr. Function Size R/W Comment If KEL Memory Offset 100h[0] = 1(EmulationEnabled bit). 060h Keyboard/Mouse - Data Port 8bit Yes 061h Port B Control 8bit Yes --- --- 062h-063h No Specific Usage 064h Keyboard/Mouse - Command/ Status 8bit 065h-06Fh No Specific Usage --- If MSR 5140001Fh[0] = 1 (SNOOP bit) and KEL Memory Offset 100h[0] = 0 (EmulationEnabled bit).
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 I/O Map Continued… I/O Addr. Function Size R/W Comment 0CCh Master DMA Address - Channel 7 8bit Yes 16bit values in two transfers.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 I/O Map Continued… I/O Addr. Function Size R/W Comment 3F1h Floppy Status R B 8bit RO First Floppy. 3F2h Floppy Digital Out 8bit Shw@ First Floppy. 3F3h No Specific Usage 8bit 3F4h Floppy Cntrl Status 8bit RO First Floppy. 3F5h Floppy Data 8bit Yes First Floppy.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 6. VGA/LCD 6.1. VGA/LCD Controller of the Geode LX800 Highly integrated flat panel and CRT GUI Accelerator & Multimedia Engine, Palette/DAC, Clock Synthesizer, and integrated frame buffer HiQColorTM Technology implemented with TMED (Temporal Modulated Energy Distribution) Hardware Windows Acceleration Hardware Multimedia Support High-Performance flat panel display resolution and color depth at 3.
DIGITAL-LOGIC AG 6.4. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Flat Panel Functional Description The FP connects to the RGB port of the video mixer. LCD Interface: The FP interfaces directly to industry standard 18 or 24bit active matrix thin-film-transistor (TFT). The digital RGB or video data that is supplied by the video logic is converted into a suitable format to drive a wide variety range of panels with variable bits.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 7. DESCRIPTION OF THE CONNECTORS The following pages describe the connector pin-out for the MSM800SEV/SEL V2.1/V2.2, MSMBEV V1.1, and MSMXEV/XEL V1.0. Flat cable 44pin IDE is: All others are: NC: Connector X1 X10 X15 X29 X30 X300 X31 X33 X38 X39 X44 X50 X51 X52 X53 X60 X70 X71 X100 X101 X110 X230 IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.
DIGITAL-LOGIC AG 7.1. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Top Side of the MSM800SEV/SEL V2.1/V2.
DIGITAL-LOGIC AG 7.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Bottom Side of the MSM800SEV V2.1/V2.
DIGITAL-LOGIC AG 7.3. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Top Side of the MSM800BEV V1.
DIGITAL-LOGIC AG 7.4. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Top Side of the MSM800XEV/XEL V1.
DIGITAL-LOGIC AG X1 Pin 1 3 5 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG X15 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 LCD TFT Interface (flat panel signals) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 Signal FPM (out) CRT-Vert.Synch Backlight Supply output (5/12V)* CRT-Horiz.Synch VCC 3.
DIGITAL-LOGIC AG X29 Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG X31 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Keyboard PS/2/-Mouse Utility Connector The speaker must be connected to VCC, to have a low, inactive current in the speaker. Pin 1 3 5 7 9 Signal Pin Signal Speaker Out 2 Ground (for Speaker) Reset In* (active low) 4 VCC Keyboard Data 6 Keyboard Clock Ground 8 External Battery PS/2 Mouse Clock 10 PS/2 Mouse Data * Reset-In signal has an internal Pullup of 1k to 5Volt VCC.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 X33 10/100 BASE-T Interface Connector Pin * 1 2 3 4 5 6 7 8 9 10 Signal TXTX+ RXRX+ Activity LED BAT input 3.0-3.6V GND VCC 3.3V Speed LED Link LED X38 Serial Port COM1 Header onboard Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 X39 Remarks The LAN transformer is onboard starting with board version: SEV/SEL V2.1 XEV/XEL V0.1 BEV V1.0 Ext. Lithium battery (see also chapter 2.13.
DIGITAL-LOGIC AG X44 Pin 1 2 3 4 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG X60 Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 X70 FD26 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 Pin 21 Pin 22 Pin 23 Pin 24 Pin 25 Pin 26 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 X101 PC/104+ BUS Interface Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 A GND/5.0V KEY2 VI/O AD05 C/BE0* GND AD11 AD14 +3.3V SERR* GND STOP* +3.3V FRAME* GND AD18 AD21 +3.3V IDSEL0 AD24 GND AD29 +5V REQ0* GND GNT1* +5V CLK2 GND +12V NC B Reserved AD02 GND AD07 AD09 VI/O AD13 C/BE1* GND NC +3.3V TRDY* GND AD16 +3.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 X110 LPC-Port Only for factory and POD-Diagnostic use. Pin 1 3 5 7 9 11 13 Signal VCC 3.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 8. JUMPER LOCATIONS ON THE BOARD The following figure shows the location of all jumper blocks on the MSB800/L board. The numbers shown in this figure are silk screened on the board so that the pins can easily be located. This chapter refers to the individual pins for these jumpers. The default jumper settings are indicated with asterisks.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800SEV/SEL V2.1/V2.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800SEV/SEL V2.1/2.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800BEV V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 MSM800XEV/XEL V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 9. CABLE INTERFACES 9.1. The Hard Disk Cable 44pin IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable; 44pins = 40pins signal and 4pins power. 1 2 39 1 2 40 39 43 44 40 43 44 Maximum length for the IDE cable is 30cm. Attention! Check the pin 1 marker of the cable and the connector before you power-on.
DIGITAL-LOGIC AG 9.2. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 The COM 1/2 Serial Cable DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable. Line of pin 1 1 2 6 1 2 7 3 8 9 4 COM1 9pin D-Sub male 5 COM1/2 9 10 Attention! Do not short circuit these signal lines. Never connect any pins on the same plug or to any other plug on the MICROSPACE MSM800SEV. The +/- 10Volts will destroy the MICROSPACE core logic immediately.
DIGITAL-LOGIC AG 9.3. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 The Printer Cable IDT terminal for dual row 0.1" (2.54mm grid) and 1.27 mm flat cable Parallelport Cable LPT1 14 15 24 25 1 2 12 13 Attention! Maximum length of this cable is 6 meters. Prevent short-circuits. Never apply power to these signals, the MICROSPACE MSM800SEV will be destroyed.
DIGITAL-LOGIC AG 9.4. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG 9.5. MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 The LAN Cable (RJ45) Attention! Early board versions use the MSM855-LANCON. Later versions must use the MSM800-LANCON, because the LAN transformer (pulse) is integrated on the MSM800 product. See below for the version numbers. Use the MSM800-LANCON starting with the: SEV/SEL Version 2.1 XEV/SEL Version 0.1 BEV Version 1.0 For earlier versions use the MSM855-LANCON RJ45 connector 10BaseT (IEEE 802.3i), 100BaseTX (IEEE 802.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 10.THERMAL SPECIFICATIONS The temperature is specified by 90°C for the BGA case. The table shows the allowable ambient temperature at various airflows and with different heat sink configurations. Product MSM800… CPU Frequency [MHz] Air Temperature (ambient) T case: No Airflow 0m/sec T case: Airflow 3m/sec T case: Airflow 6m/sec Photo of heat sink Heat sink type Part Nr.
DIGITAL-LOGIC AG Option MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Assembly example on an MSM800BEV Heat sink Heat sink, small (35x37.5x6mm) 807041 -25°C to 70°C 807042 Heat sink, large (79x79.5x8.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 11.ASSEMBLY VIEWS 11.1. MSM800SEV/SEL V2.1/V2.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 11.2. MSM800BEV V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 11.3. MSM800XEV/XEL V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 12.PREVIOUS PRODUCT VERSIONS 12.1. Board Dimensions – Versions 1.0 / 1.1 / 1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 12.2. Assembly Views 12.2.1. MSM800SEV/SEL V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 12.2.2. MSM800 V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 12.3. Connectors and Jumpers of Previous Product Versions 12.3.1. Description of the Connectors for V1.0 /V1.1 /V1.2 Flat cable 44pin IDE is: All others are: NC: Connector J1 J2 J3 J4 J5 J7 J9 J10 J11 J12 J13 J14 J15 J16 J17 J19 U1 X1 X2 IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.
DIGITAL-LOGIC AG J2 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 VGA Monitor (CRT-signals) J2 Header 10 Pin -M 2 4 6 8 9 1 3 5 7 10 15 pins HiDensity DSUB Pin Signal 1 Red 2 Green 3 Blue 13 H-Synch 14 V-Synch 5 + 11 Bridged 5, 6, 7, 8 Ground Signal VGA red VGA green VGA blue Horizontal Synch Vertical Synch Ground NC NC Serial_Data Serial_Clock The VGA-CRT signals from J2 must be wired to a standard VGA HiDensity DSub connector (female): The LCD signals must be wired panel specific.
DIGITAL-LOGIC AG J4 Pin 1 3 J5 Pin 1 2 3 4 J8 Pin 1 3 5 7 9 11 13 J9 JTAG-Port Signal TCK TDI Pin 2 4 USB 1 Connector Signal VCC USB-P0USB-P0+ GND Signal TMS TDO J7 Pin 1 2 3 4 USB 2 Connector Signal VCC USB-P0USB-P0+ GND LPC-Port Only for factory and POD-Diagnostic use. Signal Pin Signal VCC 3.
DIGITAL-LOGIC AG J11 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Keyboard PS/2/-Mouse Utility Connector The speaker must be connected to VCC, to have a low inactive current in the speaker ! Pin 1 3 5 7 9 Signal Pin Signal Speaker Out 2 Ground (for Speaker) Reset In (activ low) 4 VCC Keyboard Data 6 Keyboard Clock Ground 8 Ext. Lithium battery PS/2 Mouse Clock 10 PS/2 Mouse Data Reset-In-Signal has an internal Pullup of 1k to 5Volt VCC.
DIGITAL-LOGIC AG J12 Pin 1 2 3 4 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG J14 Floppy Disk interface connector FD26 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 10 Pin 12 Pin 14 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 Pin 21 Pin 22 Pin 23 Pin 24 Pin 25 Pin 26 J15 Pin 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG J16 Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 J17 Pin * 1 2 3 4 5 6 7 8 9 10 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.
DIGITAL-LOGIC AG J18 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 PC/104+ BUS Interface A GND/5.0V KEY2 VI/O AD05 C/BE0* GND AD11 AD14 +3.3V SERR* GND STOP* +3.3V FRAME* GND AD18 AD21 +3.3V IDSEL0 AD24 GND AD29 +5V REQ0* GND GNT1* +5V CLK2 GND +12V -12V B Reserved AD02 GND AD07 AD09 VI/O AD13 C/BE1* GND PERR* +3.3V TRDY* GND AD16 +3.
DIGITAL-LOGIC AG J19 Pin 1 3 5 7 MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 Power supply Signal GND NC NC GND Pin 2 4 6 8 Signal VCCSUS +5Volt Input Supply (+12V input) PWR_BTN# VCCSUS +5Volt Input Supply VCCSUS = 5Volt Main Supply Input Pin placement: X1 2 4 6 8 1 3 5 7 LCD TFT Interface (Flat Panel sSignals) Pin Signal TFT 18 Bit TFT 24 Bit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 FPM (out) CRT-Vert.
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 13.INDEX Floppy disk ......................................................... 17 Floppy Disk Interface ................................... 49, 79 Floppy Disk Interface Connector ....................... 50 1 10/100 BASE-T interface ....................................77 G A Graphic Modes................................................... 66 Addressing PCI Devices .....................................45 Assembly Views......................
DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.7 P PC/104 BUS interface.................................80, 115 PC/104+ BUS Interface ......................................81 PC104 Bus..........................................................41 PC104/ISA BUS..................................................35 PC104+ Bus........................................................43 Power..................................................................47 Power Requirements ......................
