User manual

DIGITAL-LOGIC AG MSM800SEV/SEL/BEV/XEV/XEL Detailed Manual V1.5
83
8.5. The LAN Cable (RJ45)
Attention!
Since board version V2.1 of the MSM800SEV you can not use the MSM855-LANCON anymore,
because the LAN transformer (Pulse) is integrated on the PCB.
MSM800SEV V2.1/2.2 = MSM800-LANCON
This picture shows the MSM800-LANCON.
RJ45 connector 10BaseT (IEEE 802.3i), 100BaseTX (IEEE 802.3u):
MDI-Pin EIA/TIA 568A
colors (wire/line)
Pin Twisted
Pair
TX+ White /green 1
3
TX- Green 2
3
RX+ White/orange 3
2
GND .. 4
1
GND .. 5
1
RX- Orange 6
2
GND .. 7
4
GND .. 8
4
Cabling:
Do not exceed 100m (328 feet); minimum quality of CAT5, preferably S/FTP or STP CAT6.
Be careful to have a well balanced shield/ground concept.