User`s manual

DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A
116
10.2 Intel 82559ER Ethernet chip
Create a directory C:\network on your harddisk.
Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559ER\ onto your HD.
10.2.1 Installation example for MSDOS Novell 4.11
Make sure, that the following directories are in the directory c:\network:
- x:\drivers\network\intel\82559er\drivers
- x:\drivers\network\intel\client\dos
Create a *.bat file in the route C:\, with the name “startpro.bat”.
The file has the following contents:
c:
cd network
cd drivers
lsl
e100bodi
ipxodi
cd..
cd dos
vlm
cd \
Start the file “startpro.bat”.
10.2.2 Driver installation WINDOWS 95
- Copy Intel Pro100+ driver on HD (x:\drivers\network\intel\82559ER).
- De-install all networkdrivers under Windows95 in system and software folders and restart Windows.
Networkcard Pro10 PCI will be auto-detected and all drivers can be installed (of the copied directory).
10.2.3 Driver installation WINDOWS 98SE
- Update the driver from the Intel® PRO/10+PCI device in the device manager.
- Choose the option “select list with drivers”.
- Choose the “Intel 8255xx based Ethernet PCI Adapter(10/100)” .
- Go on. If you get a failure report, press ok. If the PC hangs switch off / on the power.
- After reboot you must activate the Intel 8255xx driver in the device manager.
10.2.4 Driver installation WINDOWS NT
Please note, that one has to write the whole directory path, when NT asks for the new driver installation.
Windows NT does not search automatically for a new directory.
Installing another driver:
Select the path, where the driver is located, especially where the OEM- inf file is located.
E.g. on our DLAG- CD x:\drivers\network\intel
10.2.5 Driver installation WINDOWS 2000
- Update the driver from the Intel® PRO/10+PCI device in the device manager.
- Choose the option “select list with drivers”.
- Choose the “Intel 8255xx based Ethernet PCI Adapter(10/100)” .
- Go on.