TECHNICAL USER'S MANUAL FOR: PC/104 plus SmartCore MSM-P5/P3 SEN / SEV MSM-P5/P3 XEN / XEV Nordstrasse 11/F CH- 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A COPYRIGHT 1998- 2003 BY DIGITAL-LOGIC AG No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, in any form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permission of DIGITAL-LOGIC AG. REVISION HISTORY: Product Version MSM-Px-XEV Product Version MSM-Px-SEV V3.4 V3.5A BIOS Doc. Date/Vis: Version Version Modification: Remarks, News, Attention: V1.14 V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Table of Contents 1 Preface ............................................................................................................................ 6 1.1 1.2 1.3 1.4 1.5 1.6 Trademarks ...................................................................................................................... 6 Disclaimer.........................................................................................................................
DIGITAL-LOGIC AG 4.8 4.9 MSMP5 / P3 SEN/SEV Manual V1.6A EEPROM saved CMOS Setup........................................................................................ 48 Download the VGA-BIOS and the CORE-BIOS ........................................................... 49 4.9.1 VGA BIOS Download Function .................................................................................................. 50 4.10 Memory.....................................................................................
DIGITAL-LOGIC AG 10.4.4 MSMP5 / P3 SEN/SEV Manual V1.6A Remark for Windows ME.......................................................................................................... 118 11 Special Peripherals, Configuration......................................................................... 119 11.1 11.1.1 The Special Function Interface for MICROSPACE ................................................. 119 INT 15h SFR Functions ......................................................................
DIGITAL-LOGIC AG 1 MSMP5 / P3 SEN/SEV Manual V1.6A PREFACE This document is for integrators and programmers of systems based on the MICROSPACE-Computer family. It contains information on hardware requirements, interconnections, and details of how to program the system. The specifications given in this manual were correct at the time of printing; advances mean that some may have changed in the meantime. The information contained in this document is, to the best of our knowledge, entirely correct.
DIGITAL-LOGIC AG 1.4 MSMP5 / P3 SEN/SEV Manual V1.6A Explanation of Symbols CE Conformity This symbol indicates that the product described in this manual is in compliance with all applied CE standards. Please refer also to the section “Applied Standards” in this manual. Caution, Electric Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A This symbol and title warn of general hazards from mechanical, electrical, chemical failure. This may Endager your life/health and/or result in damage to your material.
DIGITAL-LOGIC AG 1.5 MSMP5 / P3 SEN/SEV Manual V1.6A For Your Safety Your new Digital-Logic product was developed and tested carefully to provide all features necessary to ensure its compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation.
DIGITAL-LOGIC AG 1.6 MSMP5 / P3 SEN/SEV Manual V1.6A Limited Two Year Warranty DIGITAL-LOGIC AG warrants the hardware and software products it manufactures and produces to be free from defects in materials and workmanship for one year following the date of shipment from DIGITAL-LOGIC AG, Switzerland. This warranty is limited to the original purchaser of product and is not transferable.
DIGITAL-LOGIC AG 2 OVERVIEW 2.1 Standard Features MSMP5 / P3 SEN/SEV Manual V1.6A The MICROSPACE PC/104 is a miniaturized modular device incorporating the major elements of a PC/AT compatible computer.
DIGITAL-LOGIC AG 2.3 MSMP5 / P3 SEN/SEV Manual V1.6A MSMP5 / P3 SEV Block Diagram CPU smartCore-P5 (TX) smartCore P3 (BX) DRAM BUS DRAM Up V3.5 (SO-DIMM up to 256MB) PCI-BUS Temp. sensor PC/104plus PCI-Signals VRAM PIIX4 Speaker RTC 2 MB LCD/VGA Controller 69000 (69030/ VRAM 4MB) EIDE D LiBAT 2x USB (since V3.8) Watchdog BIOS 256kByte EEPROM 2kByte IrDA since V3.6 Compact Card (2. IDE port since V3.
DIGITAL-LOGIC AG 2.4 MSMP5 / P3 SEN/SEV Manual V1.6A MSMP5 / P3 - X/SEV specifications CPU: Specification CPU MSM-P5-xxx CPU MSM-P3-xxx Compatibility: 1. Level Cache: 2.
DIGITAL-LOGIC AG External Interface Videointerfaces USB V1.1 LPT1: COM1: COM2: Keyboard: Mouse: Floppy: Harddisk: Speaker: ISA-Bus: PCI-Bus: MSMP5 / P3 SEN/SEV Manual V1.6A Specification CRT1, LCD for TFT and STN 2 channels V1.1 available Internal RS232 RS232 PS/2 PS/2 26pin FCC Interface for TEAC Minifloppy 1 channel 44pin RM2.0mm ATAIDE-cable 0.1Watt Speaker PC/104 PC/104plus Powersupply: Input voltage: Input inrush current: Protection: Spec. 3.
DIGITAL-LOGIC AG Operating Temperature Extended temperature range: MSM-P5-SEV 166MHz MSM-P5-SEV 266MHz MSM-P3-SEV 300MHz MSM-P3-SEV 400MHz MSM-P3-SEV 700MHz MSM-P5-SEN MSM-P5-SEN MSM-P3-SEN MSM-P3-SEN MSM-P3-SEN 166MHz 266MHz 300MHz 400MHz 700MHz EMI / EMC Tests MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 2.5 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 2.6 BIOS History Version: 1.01 1.02 1.10 1.11 1.13 Date: Oct.98. Nov.98 May 1999 Aug 1999 Nov 1999 Status: Beta Test AMI Beta Test Beta Test Released AMI Released 1.14 Dec 2000 Released 2.20 2.3x 2.36 2.37 2.50 April 2000 May – Aug 2001 Sept.2001 Nov. 2001 Dez 2002 Released AMI Development Vers. Beta Vers. Released Phoenix 2.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 2.8 Mechanical Dimensions 2.8.1 MSM-P5/P3-SEV Boardversion from V3.9 with SODIMM MSMP5 / P3SEV Version V3.9___________________________ Unit: mm (millimeter) Tolerance: +/- 0.1mm Date: 22.10.
DIGITAL-LOGIC AG 2.8.2 MSMP5 / P3 SEN/SEV Manual V1.6A MSM-P5/P3-XEV with soldered memory MSMP5 / P3XEV Version V1.2___________________________ Unit: mm (millimeter) Tolerance: +/- 0.1mm Date: 22.10.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 2.
DIGITAL-LOGIC AG 2.10 MSMP5 / P3 SEV MSMP5 / P3 SEN/SEV Manual V1.6A Incompatibilities to a standard PC/AT No incompatibilities are observed. 2.11 Related Application Notes # 80 Description High frequency Radiation (to meet EN55022) 84 Power consumption on Pentium / any other boards with attached drives (HDD, CD) SODIMM 256MB support 97 Application Notes are availble at http://www.digitallogic.com ->support, or on any Application CD from DIGITAL-LOGIC.
DIGITAL-LOGIC AG 2.12 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 2.13 MSMP5 / P3 SEN/SEV Manual V1.6A High frequency Radiation (to meet EN55022/EN61000) Since the PC/104 CPU modules are very high integrated embedded computers, no peripheral lines are protected against the radiation of high frequency spectrum. To meet a typical EN55022 requirement, all peripherals, they are going outside of the computer case, must be filtered externaly.
DIGITAL-LOGIC AG 3 MSMP5 / P3 SEN/SEV Manual V1.6A PC/104 BUS SIGNALS Please note, that may not all of the signals are available on this board (check chapter 5 “Description of the connectors”) AEN, output Address Enable is used to degate the microprocessor and other devices from the I/O channel to allow DMA transfers to take place.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A IRQ[ 3 - 7, 9 - 12, 14, 15], input These signals are used to tell the microprocessor that an I/O device needs attention. An interrupt request is generated when an IRQ line is raised from low to high. The line must be held high until the microprocessor acknowledges the interrupt request. /Master, input This signal is used with a DRQ line to gain control of the system.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A SD[O..15], input/output These signals provide bus bits 0 through 15 for the microprocessor, memory, and I/0 devices. DO is the least-significant Bit and D15 is the most significant Bit. All 8-Bit devices on the I/O channel should use DO through D7 for communications to the microprocessor. The 16-Bit devices will use DO through D15.
DIGITAL-LOGIC AG 3.1 MSMP5 / P3 SEN/SEV Manual V1.6A Expansion Bus The bus currents are as follows: Output Signals: IOH: IOL: D0 - D16 A0 - A23 MR, MW, IOR, IOW, RES, ALE, AEN, C14 DACKx, DRQx, INTx, PSx, OPW 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA 8 mA Output Signals: Logic Family: Voltage: Input Signals: ABT-Logic ViH (min.) = 2.15 V ABT-Logic Vil (max.) = 0.85 V 3.1.
DIGITAL-LOGIC AG 4 MSMP5 / P3 SEN/SEV Manual V1.6A DETAILED SYSTEM DESCRIPTION This system has a system configuration based on the ISA architecture. Check the I/O and the Memory map in this chapter. 4.1 Power Requirements The power is connected through the PC/104 power connector; or the separate power connector on the board. The supply uses only the +5 Volts and ground connection.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Current consumption @ 5Volt supply at –30°C/+25°C/+85°C Mode Memory DLAG-Nr. MSMP5-SEV-266MHz (DLAG: 801562) DOS: C:\ 64 MB 890644 SDRAM 128 MB 890646 SDRAM 256 MB 890647 SDRAM DOS: EDIT running 64 MB 890644 SDRAM Autoexec.bat 128 MB 890646 SDRAM 256 MB 890647 SDRAM Win2000: Desktop 64 MB 890644 SDRAM 128 MB 890646 SDRAM 256 MB 890647 SDRAM Win2000: HCT v9.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Current consumption @ 5Volt supply at –30°C/+25°C/+85°C Mode Memory DLAG-Nr. MSMP3-SEV-400MHz (DLAG: 801800) DOS: C:\ 890644 SDRAM 64 MB 128 MB 890646 SDRAM 256 MB 890562 SDRAM DOS: EDIT running 890644 SDRAM 64 MB AUTOEXEC.BAT 128 MB 890646 SDRAM 256 MB 890562 SDRAM Win2000: Desktop 890644 SDRAM 64 MB 128 MB 890646 SDRAM 256 MB 890562 SDRAM Win2000: HCT v9.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 4.2 CPU, Boards and RAMs 4.2.1 CPUs of this MICROSPACE Product Processor: Type: P5-166MHz P5-266MHz 4.2.2 Clock: Intel Intel Landmark MHz: 166 MHz 266 MHz Landmark Units: 166 MHz 266 MHz 900 1500 Numeric Coprocessor Is always integrated into the Pentium CPUs. 4.2.3 Speed: Size: Bits: Capacity: Bank: DRAM Memory 70ns soldered onboard TSOP DRAMs SODIMM 144pin 32 Bit 32, 64 MBytes SODIMM (up to 256MB) 1, 2 4.3 Interface 4.3.
DIGITAL-LOGIC AG 4.3.3 MSMP5 / P3 SEN/SEV Manual V1.6A Serial Ports COM1-COM2 The serial channels are fully compatible with 16C550 UARTS. COM1 is the primary serial port, and is supported by the board' s ROM-BIOS as the PC-DOS ' COM1'device. The secondary serial port is COM2; it is supported as the ' COM2'device.
DIGITAL-LOGIC AG 4.3.4 MSMP5 / P3 SEN/SEV Manual V1.6A Floppy Disk Interface The onboard floppy disk controller and ROM-BIOS support one or two floppy disk drives in any of the standard PC-DOS and MS-DOS formats shown in the table . Supported Floppy Formats Capacity 1.2 MB 720 K 1.44 M Drive size 5-1/4" 3-1/2" 3-1/2" Tracks 80 80 80 Data rate 500 KHz 250 KHz 500 KHz DOS version 3.0 - 6.22 3.2 - 6.22 3.3 - 6.
DIGITAL-LOGIC AG 4.3.5 MSMP5 / P3 SEN/SEV Manual V1.6A Speaker Interface One of the board' s CPU device provides the logic for a PC compatible speaker port. The speaker logic signal is buffered by a transistor amplifier, and provides approximately 0.1 watt of audio power to an external 8 ohm speaker. Connect the speaker between VCC and speaker output to have no quiescient current. 4.4 Controllers 4.4.
DIGITAL-LOGIC AG 4.5.2 MSMP5 / P3 SEN/SEV Manual V1.6A Battery backed clock (RTC) An AT compatible date/time clock is located within the chipset. The device also contains a CMOS static RAM, compatible with that in standard ATs. System configuration data is normally stored in the clock chip' s CMOS RAM in a manner consistent with the convention used in other AT compatible computers. Connect an external Lithium battery to J24.
DIGITAL-LOGIC AG 4.5.2.2 MSMP5 / P3 SEN/SEV Manual V1.6A Bettery-Lifetime of Version V3.8 Battery specs: Lowest temp. -40°C Manufacturer: MAXELL Type: ER10/28 Capacity vers. Temp: 5uA 410mAh Voltage vers. Temp. 5uA 3.5V Nominal values: 3.6V / 410mAh / -55°C...~+85°C Information taken from the datasheet of MAXELL ER10/28 PRODUCT: MSMP5/3 version 3.8 Battery current: Battery-Lifetime: Nominal temp. +20°C Highest temp. +85°C 410mAh 3.6V 410mAh 3.
DIGITAL-LOGIC AG 4.5.3 MSMP5 / P3 SEN/SEV Manual V1.6A External battery assembling: If customer wants to connect an external battery (check for the appropriate connector in the chapter DESCRIPTION OF THE CONNECTORS), then some precautions have to be made: • To prevent, that the external battery gets charged from the board, a diode has to be assembled in serial from the battery to the connector This is not necessary anymore since boardversion V3.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 4.6 BIOS 4.6.1 ROM-BIOS Sockets An EPROM socket with 8 Bit wide data access normally contains the board' s AT compatible ROM-BIOS. The socket takes a 29F020 EPROM (or equivalent) device. The board' s wait-state control logic automatically inserts four memory wait states in all CPU accesses to this socket.
DIGITAL-LOGIC AG 4.6.3 MSMP5 / P3 SEN/SEV Manual V1.6A BIOS CMOS Setup If wrong setups are memorized in the CMOS-RAM, the default values will be loaded after resetting the RTC/CMOS-RAM with the CMOS-RESET jumper. If the battery is down, it is always possible to start the system with the default values from the BIOS. WARNING: On the next setup pages (switch with TAB) the values for special parameters are modifiable. Normally the parameters are set correctly by DIGITAL-LOGIC AG.
DIGITAL-LOGIC AG 4.7 MSMP5 / P3 SEN/SEV Manual V1.6A CMOS RAM Map Systems based on the industry-standard specification include a battery backed Real Time Clock chip. This clock contains at least 64 bytes of non-volatile RAM. The system BIOS uses this area to store information including system configuration and initialization parameters, system diagnostics, and the time and date. This information remains intact even when the system is powered down. The BIOS supports 128 bytes of CMOS RAM.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG CMOS Map MSMP5 / P3 SEN/SEV Manual V1.6A Continued... Location Description 0Eh CMOS Location for Bad CMOS and Checksum Flags bit 7 = Flag for CMOS Lost Power 0 1 bit 6 = = Power OK Lost Power = Flag for CMOS checksum bad 0 1 = = 0Fh Shutdown Code 10h Diskette Drives bits 7-4 = Diskette Drive A 0000 0001 0010 0011 0100 0101 = = = = = = Checksum is valid Checksum is bad Not installed Drive A = 360 K Drive A = 1.2 MB Drive A = 720 K Drive A = 1.44 MB Drive A = 2.
DIGITAL-LOGIC AG CMOS Map MSMP5 / P3 SEN/SEV Manual V1.6A Continued...
DIGITAL-LOGIC AG CMOS Map MSMP5 / P3 SEN/SEV Manual V1.6A Continued...
DIGITAL-LOGIC AG CMOS Map MSMP5 / P3 SEN/SEV Manual V1.6A Continued...
DIGITAL-LOGIC AG 4.7.1 MSMP5 / P3 SEN/SEV Manual V1.6A Harddisk PIO Modes Block Mode Transfer: (Multi-Sector) Block mode boots IDE drive performance by increasing the amount of data transferred. No Block Mode: Block Mode: 512 Byte per interrupt up to 64 kByte per interrupt LBA (logical block addressing) is a new method of addressing data on a disk drive. In the standard ST506 (MFM) ISA hard disk, data is accessed via a cylinder - head - sector format. LBA Mode: LBA Mode disabled: max.
DIGITAL-LOGIC AG 4.8 MSMP5 / P3 SEN/SEV Manual V1.6A EEPROM saved CMOS Setup The EEPROM has different functions, as listed below: • Backup of the CMOS-Setup values. • Storing system informations like: version, production date, customisation of the board, CPU type. • Storing user/application values. The EEPROM will be updated automatically after exiting the BIOS setup menu. The system will operate also without any CMOS battery. While booting up, the CMOS is automatically updated with the EEPROM values.
DIGITAL-LOGIC AG 4.9 MSMP5 / P3 SEN/SEV Manual V1.6A Download the VGA-BIOS and the CORE-BIOS Before downloading a BIOS, please check as follows: - Select the SHADOW option in the BIOS, for a BIOS and VGA (if this option is available). Disable the EMM386 or other memory managers in the CONFIG.SYS of your bootdisk. Make sure, that the DOWN_xxx.EXE programm and the BIOS to download are on the same path and directory! Boot the DOS without config.sys & autoexec.bat -> press “F5” while starting DOS boot.
DIGITAL-LOGIC AG 4.9.1 MSMP5 / P3 SEN/SEV Manual V1.6A VGA BIOS Download Function The BIOS for the VGA must be downloaded, before a LCD is connected. This could be also a new LCD- display, which needs a corresponding VGA- BIOS. How to download a VGA- BIOS: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Restart the system with the SHADOW enabled (if available) and no EMM386 loaded. Check, if you find the DOWN_xxx.EXE and the *.V40 / *.000 files on your disk, to get downloaded. Refer to the VGABIOS.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 4.10 Memory 4.10.1 System Memory Map The PENTIUM -100 CPU used as central processing unit on the MICROSPACE has a memory address space which is defined by 32 address bits. Therefore, it can address 1 GByte of memory.
DIGITAL-LOGIC AG 4.10.2 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG I/O Address Read/Write Status MSMP5 / P3 SEN/SEV Manual V1.6A Description 00A0h - 00A1h are reserved for the slave programmable interrupt controller. The bit definitions are identical to those of addresses 0020h - 0021h except where indicated.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG I/O Address Read/Write Status MSMP5 / P3 SEN/SEV Manual V1.6A Description I/O addresses 02F8h - 02FFh are reserved for use with serial port 2. See the bit definitions for I/O addresses 03F8h - 03FFh.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A I/O Address Read/Write Status Description 037Ah R/W Control port for parallel port 1 bits 7-5 = Reserved bit 4 = 1 Enable IRQ bit 3 = 1 Select printer bit 2 = 0 Initialize printer bit 1 = 1 Automatic line feed bit 0 = 1 Strobe 03B0h 03B8h R/W Various video registers I/O addresses 03BCh - 03BEh are reserved for use with parallel port 3. See the bit definitions for addresses 0378h - 037Ah.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A I/O Address Read/Write Status Description 03F8h R/W Baud rate divisor (low byte) - This byte along with the high byte (03F9h) store the data transmission rate divisor. bits 7-0 = Data bits 0-7 when the Divisor Latch Access Bit (DLAB) is 1 03F9h R/W Baud rate divisor (high byte) - This byte along with the low byte (03F8h) store the data transmission rate divisor.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 4.11 MSMP5 / P3 SEN/SEV Manual V1.6A BIOS Data Area Definitions The BIOS Data Area is an area within system RAM that contains information about the system environment. System environment information includes definitions associated with hard disks, diskette drives, keyboard, video, as well as other BIOS functions. This area is created when the system is first powered on. It occupies a 256-byte area from 0400h - 04FFh.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A BIOS Data Area Definitions Continued...
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A BIOS Data Area Definitions Continued...
DIGITAL-LOGIC AG BIOS Data Area Definitions MSMP5 / P3 SEN/SEV Manual V1.6A Continued... Location Description 50h - 5Fh Position of cursor for each video page. Current cursor position is stored two bytes per page. First byte specifies the column, the second byte specifies the row. 60h - 61h Start and end lines for 6845-compatible cursor type. = starting scan line, 61h = ending scan line.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A BIOS Data Area Definitions Continued...
DIGITAL-LOGIC AG BIOS Data Area Definitions MSMP5 / P3 SEN/SEV Manual V1.6A Continued... Location Description 92h - 93h Scratch area for diskette media. Low byte for drive A, high byte for drive B. 94h - 95h Current track number for both drives. Low byte for drive A, high byte for drive B.
DIGITAL-LOGIC AG 4.11.1.1 MSMP5 / P3 SEN/SEV Manual V1.6A Compatibility Service Table In order to ensure compatibility with industry-standard memory locations for interrupt service routines and miscellaneous tabular data, the BIOS maintains tables and jump vectors.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 4.12 VGA, LCD 4.12.1 VGA / LCD Controller 69000 (69030) TM 69000 High Performance Flat Panel / CRT HiQVideo Accelerator with Integrated Memory • Highly integrated Flat Panel and CRT GUI Accelerator & Multimedia Engine, Palette/DAC, Clock Synthesizer, and integrated frame buffer • Integrated High performance SDRAM memory.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A High Performance Integrated Memory The integrated SDRAM memory can support up to 83MHz operation, thus increasing the available memory bandwidth for the graphics subsystem. The result is support for additional high color / high resolution graphics modes combined with real-time video acceleration.
DIGITAL-LOGIC AG 4.12.4 MSMP5 / P3 SEN/SEV Manual V1.6A VGA/LCD BIOS Support Each LCD display needs a specific adapted VGA-BIOS. This product is equipped with the CRT standard VGABIOS. To connect a LCD display to this product, you need to perform the following: 1. Check the LCD_OVERVIEW.PDF if the LCD BIOS is available. Get the latest VGA-BIOS at our webpage http://www.digitallogic.com IF THE LCD BIOS IS AVAILABLE: 2.
DIGITAL-LOGIC AG 4.12.5 MSMP5 / P3 SEN/SEV Manual V1.6A Memory 69000/69030 CRT/TFT Panels Hor. Resol. Vert. Resol. Color bpp Refr. Hz DCLK Mhz MEM kByte Cursor FB/C kByte kByte 640 640 640 640 480 480 480 480 8 8 8 8 60 72 75 85 25.175 31.500 31.500 36.000 300 300 300 300 4.2 4.2 4.2 4.2 0 0 0 0 640 640 640 640 480 480 480 480 16 16 16 16 60 72 75 85 25.175 31.500 31.500 36.000 600 600 600 600 4.2 4.2 4.2 4.2 640 640 640 640 480 480 480 480 24 24 24 24 60 72 75 85 25.175 31.
DIGITAL-LOGIC AG 4.12.6 MSMP5 / P3 SEN/SEV Manual V1.6A Memory 69000/69030 Color STN-DD Panels Hor. Resol. Vert. Resol. Color bpp Refr. Hz DCLK Mhz MEM kByte Cursor FB/C kByte kByte 640 640 640 640 480 480 480 480 8 8 8 8 60 72 75 85 25.175 31.500 31.500 36.000 300 300 300 300 4.2 4.2 4.2 4.2 120 120 120 120 640 640 640 640 480 480 480 480 16 16 16 16 60 72 75 85 25.175 31.500 31.500 36.000 600 600 600 600 4.2 4.2 4.2 4.
DIGITAL-LOGIC AG 4.12.7 MSMP5 / P3 SEN/SEV Manual V1.6A Memory 69000/69030 Mono STN-DD Panels Hor. Resol. Vert. Resol. Color bpp Refr. Hz DCLK Mhz MEM kByte Cursor FB/C kByte kByte 640 640 640 640 480 480 480 480 8 8 8 8 60 72 75 85 25.175 31.500 31.500 36.000 300 300 300 300 4.2 4.2 4.2 4.2 0 0 0 0 640 640 640 640 480 480 480 480 16 16 16 16 60 72 75 85 25.175 31.500 31.500 36.000 600 600 600 600 4.2 4.2 4.2 4.2 640 640 640 640 480 480 480 480 24 24 24 24 60 72 75 85 25.175 31.
DIGITAL-LOGIC AG 4.12.8 MSMP5 / P3 SEN/SEV Manual V1.6A Video Input As described above, the onboard VGA controller C&T69000 is capable to handle a 16-Bit wide video input data stream, generated by the video input chip from PHILIPS SAA7111A. This chip communicates 2 with a kind of I C bus to the PCI VGA chip. Up to three analog inputs can be connected to the SAA7111A with the actual software. The three input channels are VIN1, VIN2 and VIN3. All of them are composite video input sources (CVBS).
DIGITAL-LOGIC AG 4.13 HiQ Video MSMP5 / P3 SEN/SEV Manual V1.6A Multimedia Support The 69000 uses independent multimedia capture and display systems on chip. The capture system places data in display memory (usually off screen) and the display system places the data in a window on the screen. The capture system can receive data from the video portin the 422 YUV format. The YUV data are served from the VideoInputProcessor (VIP) type SAA7111A.
DIGITAL-LOGIC AG 4.14 MSMP5 / P3 SEN/SEV Manual V1.6A Video Input with the SAA7111 VIP - Four analog inputs, internal analog source selectors, e.g.
DIGITAL-LOGIC AG 4.14.1.1 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 4.15 MSMP5 / P3 SEN/SEV Manual V1.6A Boot time System Boot-Times Definitionen/Boot-Medium Quick Boot* time [s] Normal Boot time [s] 12 35 23 45 18 29 From Harddisk-Hitachi Mod-DK233AA-60: Boot from Harddisk to „Starting MS-DOS“.-Prompt. Boot from Harddisk to „Win2000: Windows-Login“-Prompt. 12 49 23 59 From CompactFlash ONT-0515-0006 64MB Boot from CF to „Starting MS-DOS“-Prompt. Boot from CF to „C:\>“-Prompt.
DIGITAL-LOGIC AG 4.16 MSMP5 / P3 SEN/SEV Manual V1.6A Suspend / resume- time The following tables show the average accesstime of the product: „Save to Disk“ (Partition: phdisk /create 150‘000) Definitionen MSMP5-SEV-266MHz (DLAG: 801562) Suspend/Resume Mode Timet [s] SUSPEND MS-DOS v6.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A „Save to Disk“ (Partition: phdisk /create 150‘000) Definitionen MSMP3-SEV-400MHz (DLAG: 801800) Suspend/Resume Modus Zeit SUSPEND MS-DOS v6.22 „C:\>“ Save To Harddisk Save To CompactFlash CF Win98SE-Desktop Save To CompactFlash CF Win2000-Desktop Save To Harddisk Mit 64MB SDRAM (DLAG: 890644) Suspend 9 390 Suspend * NokMit 64MB SDRAM (DLAG: 890646) Suspend * NokMit 128MB SDRAM (DLAG: 890646) Suspend ** - RESUME MS-DOS v6.
DIGITAL-LOGIC AG 5 MSMP5 / P3 SEN/SEV Manual V1.6A DESCRIPTION OF THE CONNECTORS Flat cable • • 44pin IDE is: IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable All others are: IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.
DIGITAL-LOGIC AG J13 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG J31 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG J21 MSMP5 / P3 SEN/SEV Manual V1.6A LCD connector VGA-LCD Interface (flatpanel signals): Pin Signal Pin Signal 1 3 5 M / DE Enable BKL (TTL) VCC-Panel 3.3V / 5V (controlled by J45) Enable VEE (TTL) Enable VDD (TTL) P1 P3 P5 P7 P9 P11 P13 P15 P16 P18 P20 P21 P23 P25 P27 P29 P31 P32 P34 VCC +5V 2 4 6 FLM LP GND 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 Shift Clock P0 P2 P4 P6 P8 P10 P12 P14 GND P17 P19 Activity Output 3.
DIGITAL-LOGIC AG J25 J25 Header MSMP5 / P3 SEN/SEV Manual V1.6A VGA monitor (CRT-Signals) 10 Pin -M Signal 15 pins HiDensity DSUB Pin Signal Pin 2 Pin 4 Pin 6 Pin 8 Pin 9 VGA red VGA green VGA blue Horizontal Synch Vertical Synch Pin 1 Pin 2 Pin 3 Pin 13 Pin 14 Red Green Blue H-Synch V-Synch Pin 5 + 11 Bridged Pin 5, 6, 7, 8 Ground Pin 1 Ground Pin 3 Pin 5 Pin 7 Pin 10 Video Input 3 Video Input 2 Video Input 1 Video Clock In VideoIn is optional since V3.
DIGITAL-LOGIC AG J37 MSMP5 / P3 SEN/SEV Manual V1.6A 10/100 BASE-T interface connector J37 Pin * Signal RJ-45 Pin Signal Pin 1 Pin 2 Pin 3 Pin 4 = = = = Pin 1 Pin 2 Pin 3 Pin 6 = TX+ = TX= RX+ = RX- TX+ TXRX+ RX- * These signals are ready to connect directly to a RJ-45 connector.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG J18 PC/104+ BUS interface Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 A GND/5.0V KEY2 VI/O AD05 C/BE0* GND AD11 AD14 +3.3V SERR* GND STOP* +3.3V FRAME* GND AD18 AD21 +3.3V IDSEL0 AD24 GND AD29 +5V REQ0* GND GNT1* +5V CLK2 GND +12V -12V MSMP5 / P3 SEN/SEV Manual V1.6A B Reserved AD02 GND AD07 AD09 VI/O AD13 C/BE1* GND PERR* +3.3V TRDY* GND AD16 +3.
DIGITAL-LOGIC AG U61 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG Pin 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 Normal n/c n/c n/c n/c DU DU VCC VCC DU DU /WE n/c /RAS0 n/c /RAS1 n/c Description Don' t use Don' t use +5 VDC +5 VDC Don' t use Don' t use Read/Write Not connected Row Address Strobe 0 Not connected Row Address Strobe 1 Not connected MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG X1 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 6 MSMP5 / P3 SEN/SEV Manual V1.6A JUMPER LOCATIONS ON THE BOARD Jumper locations on the board The figure shows the location of all jumper blocks on the MSMP5SEN/SEV board. The numbers shown in this figure are silk screened on the board so that the pins can easily be located. This chapter refers to the individual pin for these jumpers. The default jumper settings are indicated with asterisks. Be careful when you change some jumpers.
DIGITAL-LOGIC AG 6.1 MSMP5 / P3 SEN/SEV Manual V1.6A The jumpers on MSMP5/P3-SEN/SEV V3.9/V3.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 6.2 MSMP5 / P3 SEN/SEV Manual V1.6A The jumpers on MSMP5/P3-SEN/SEV, since V3.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 6.3 MSMP5 / P3 SEN/SEV Manual V1.6A The jumpers on MSMP5/P3-XEN/SEV, since V1.1/V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 7 LED CRITERIONS: smartCore LED Color Function D01 D02 D17 Green Red Red Run OK Primary HDD LAN ACTIVE 3V 3V SUS 1.8V Green Green Green 3.3V OK 3.3V suspend OK 1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 8 CABLE INTERFACE 8.1 The harddisk cable 44pin IDT Terminal for Dual Row (2.00 mm grid) and 1.00 mm flat cable. 44 pins = 40 pins signal and 4 pins power. 1 2 39 1 2 40 43 44 39 40 43 44 Max. length for the IDE cable is 30 cm. ATTENTION: Check the pin 1 marker of the cable and the connector before you power on.
DIGITAL-LOGIC AG 8.2 MSMP5 / P3 SEN/SEV Manual V1.6A The COM 1/2 serial interface cable DT terminal for dual row 0.1" (2.54 mm grid) and 1.27 mm flat cable. Line of pin 1 1 2 6 7 8 9 COM1/2 9 1 2 3 4 COM1 9pin D-Sub male 5 10 ATTENTION: - Do not short-circuit these signal lines. Never connect any pins either on the same plug or to any other plug on the MICROSPACE MSMP5SEN/SEV. The +/-10 volts will destroy the MICROSPACE core logic immediately.
DIGITAL-LOGIC AG 8.3 MSMP5 / P3 SEN/SEV Manual V1.6A The printer interface cable (P4) IDT terminal for dual row 0.1" (2.54mm grid) and 1.27 mm flat cable Parallelport Cable LPT1 14 15 24 25 1 2 12 13 ATTENTION: - Maximum length of this cable is 6 meters. Prevent short-circuits. Never apply power to these signals, the MICROSPACE MSMP5SEN/SEV will be destroyed.
DIGITAL-LOGIC AG 8.4 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 8.5 MSMP5 / P3 SEN/SEV Manual V1.6A Remote function Use a Null- modem cable to connect COM1 of the DLAG- board to COM1 (COM2) port of the host- PC. These are the minimum requirements: PC1 DSub 1 connector DSub 2 connector PC2 Receive Data 2 3 Transmit Data Transmit Data 3 2 Receive Data Data Terminal Ready 4 6 Data Set Ready System Ground 5 5 System Ground Request to Send 7 8 Clear to Send When the option REMOTE is enabled in the BIOS, start the program HOSTKEY.EXE on the host- PC.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 9 SOFTWARE 9.1 The software compatibility of the MICROSPACE PC The CPU PENTIUM is fully compatible to other PC-standard CPUs. The Intel chipsets are also fully PCcompatible. No incompatibilities are known. Tested Software: Application programs: 9.2 MICROSOFT: MICROSOFT: NOVELL: INTEL: Software Haus: Software Haus: Quantum: NOVELL: NOVELL: NOVELL: IBM: DOS WIN PALMDOS Novell DOS 7.0 RMX MOSY RTX-DOS QNX NW-Lite NETx ODI services OS/2 V3.3, V4.
DIGITAL-LOGIC AG 10 MSMP5 / P3 SEN/SEV Manual V1.6A 100/10 ETHERNET LAN Required programs and drivers are located on our CD in the directory x:\DRIVERS\NETWORK\INTEL\ 10.1 - Create a directory C:\LAN100 on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559\ onto your HD. 10.1.1 - Intel 82559 Ethernet chip Installation example for MSDOS Novell 4.11 run “setup.exe” in the directory c:\lan100\...
DIGITAL-LOGIC AG 10.1.4 MSMP5 / P3 SEN/SEV Manual V1.6A Driver installation WINDOWS NT Please note, that one has to write the whole directory path, when NT asks for the new driver installation. Windows NT does not search automatically for a new directory. Installing another driver: Select the path, where the driver is located, especially where the OEM- inf file is located. E.g. on our DLAG- CD x:\drivers\network\intel 10.1.
DIGITAL-LOGIC AG 10.2 MSMP5 / P3 SEN/SEV Manual V1.6A Intel 82559ER Ethernet chip Create a directory C:\network on your harddisk. Copy the programs and drivers of x:\DRIVERS\NETWORK\INTEL\82559ER\ onto your HD. 10.2.1 Installation example for MSDOS Novell 4.11 Make sure, that the following directories are in the directory c:\network: - x:\drivers\network\intel\82559er\drivers x:\drivers\network\intel\client\dos Create a *.bat file in the route C:\, with the name “startpro.bat”.
DIGITAL-LOGIC AG 10.2.6 MSMP5 / P3 SEN/SEV Manual V1.6A EEPROM update Do not use this function, if the EEPROM is not corrupted ! To download the datas in the EEPROM, make the following steps: - copy the folder << x:\drivers\network\intel\82559er\eeupdate >> to a floppy disk. - start MSDOS - type the following string: a:\eeupdate -all -device=1209 generic.eep generic.dat Now the EEPROM is updated again. 10.3 Compact Flash (CF) Procedure to prepare a CF to be bootable: DOS: 1.
DIGITAL-LOGIC AG 10.4.3 MSMP5 / P3 SEN/SEV Manual V1.6A Installation Windows 98 and Windows ME 1. The IrDA- device will be automatically detected and treated as a serial infrared connection in the NETWORK folder 2. After installing, execute the program Ins_IRDA.EXE (will set permanently the values in the registers) You might copy the program IRDA.EXE in the AUTOSTART folder. This program will always direct the proper IrDA port when starting Windows. 10.4.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 11 SPECIAL PERIPHERALS, CONFIGURATION 11.1 The Special Function Interface for MICROSPACE Computers SFI All functions are performed by starting the SW-interrupt 15hex with the following arguments: 11.1.1 INT 15h SFR Functions Function: Number: WRITE TO EEPROM E0h Description: Writes the Data byte into the addressed User-Memory-Cell from the serial EEPROM. The old value is automatically deleted.
DIGITAL-LOGIC AG Description: MSMP5 / P3 SEN/SEV Manual V1.6A Reads the serialnumber from the board into the serial EEPROM. Input Values: AH = E3h Function Request Output Values: DX,CX,BX rialnumber (Binary, not Ascii) Se- Function: Number: WRITE PRODUCTION DATE & RESET DLAG-COUNTERS E4h Description: Writes the production date into the addressed DLAG-Memory-Cell from the serial EEPROM. The old value is automatically deleted. If the Password is also in DX, the counters will be resettet (=0).
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Function: Number: TRANSFER KEYMATRIX TO EEPROM E7h NOT AVAILABLE ON THIS BOARD! Description: Transfers the Keymatrix table from the Keyboard controller to the serial EEPROM. Input Values: AH = E7h Output Values: None, all registers are preserved. Function: Number: WRITE INFO2 TO THE EEPROM F0h (PHOENIX) E8h (AMI) Description: Writes the information bytes into the serial EEPROM.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Function: Number: READ INFO3 FROM THE EEPROM EAh Description: Reads the information bytes out of the serial EEPROM. Input Values: AH = EAh Output Values: AX Function: Number: WATCHDOG EBh Function Request counter of BOOTERRORS counter of SETUP ENTRIES counter of LOW BATTERY ERROR counter of BOOT UP SYSTEM Description: Enables, strobes and disables the WATCHDOG. After power-up, the Watchdog is always disabled.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Function: Number: SET POWERSAVE EDh Description: Sets Powersave options. Input Values: AH = EDh Function Request AL 00 => LCD Powersave BL Bit 2 LCD-VDD on/off NOT AVAILABLE Bit 1 LCD-VEE on/off NOT AVAILABLE Bit 0 LCD-Backl. on/off NOT AVAILABLE AVAILABLE 01 => HD0 Powersave BL 0 The drive will immediately go to the Standby mode. 1 The drive will immediately go to the active mode. 2 The drive will immediately go to the standby mode.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A Function: Number: LED SWITCH-STATUS EEh NOT AVAILABLE ON THIS BOARD! Description: Sets LED and reads the switches. Input Values: AH = EEh AL 01 02 03 Function Request Set LEDs only Reads Switches only Set LEDs and read Switches BL Only for Set LED mode used LEDs Bit X is LED X Output Values: AL Switches, if mode is set, otherwise all registers are preserved.
DIGITAL-LOGIC AG 12 MSMP5 / P3 SEN/SEV Manual V1.6A BUILDING A SYSTEM To build up a system based on your board, you should prepare the following equipments: A stable power supply of 5V (> 3 ampères), depending on the cpu, memory, etc. Assemble CPU with the proper clk- settings and cooling (fan) depending on board. If necessary, a 12V power supply for LCD or onboard sound. 8 ohm speaker for an executed beep code (if available on the board).
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A BEEP CODE: BIOS Beeper 1 1-2 2-2-3-1 2-1-2-3 1-3-4-1 1-3-4-3 1-3-1-1 1-3-1-3 1-2-2-3 1-2-3-1 1-2-3-3 1-3-3-1 1-4-1-1 1-4-2-1 One short beep before boot Search for option ROMs.
DIGITAL-LOGIC AG 13 MSMP5 / P3 SEN/SEV Manual V1.6A THERMAL SPECIFICATIONS Each product will undergo a BurnIn-Test of 10 cycles of 30 min. between the operating temperatures of – 25°C to +60°C or higher if extended ranges are requested. The critical point is to meet the max. T(case) temperature of the CPU . This temperature is specified by 90°C for the SQFP-case. The tables below show the allowable ambient temperature at various airflows and with different heatsink configurations. CPU: 166MHz Temp.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 14 DIAGNOSTICS 14.1 Failures and hints 14.1.1 Other, so far not identified problems A. If the display works: 1. 2. 3. 4. Check if you have a bootable floppy or harddisk Check the CMOS parameter with the setup tools Reset the CMOS RAM with the reset jumper Re-enter the correct values with Setup B. If no display on the screen is available: 1. 2. 3. 4. 5. 6. 7.
DIGITAL-LOGIC AG 15 MSMP5 / P3 SEN/SEV Manual V1.6A CORE BIOS More details are available in the separate BIOS manual on our CD and homepage ! 16 SUSPEND-MODE / SUPPLY The BIOS allows to suspend the whole system. The BWRBTN- or LID- signals start the suspend procedure (by connecting temporary to the ground). The BIOS save the memory and all states of the peripheral chips to a file on the harddisk, finished by stoping the power. The whole system is stopped now and the power consumption is down.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.6A 17 ASSEMBLINGS VIEW 17.1 MSM-P5/P3-SEV Boardversion V3.8/V3.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 17.2 MSMP5 / P3 SEN/SEV Manual V1.6A MSM-P5/P3-SEV Boardversion V3.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 17.3 MSMP5 / P3 SEN/SEV Manual V1.6A MSM-P5/P3-XEV Boardversion V1.1/V1.
DIGITAL-LOGIC AG MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG 18 MSMP5 / P3 SEN/SEV Manual V1.
DIGITAL-LOGIC AG Speaker Special Function Interface Specifications MSMP5 / P3 SEN/SEV Manual V1.
