USB Personal Call Recorder Automatically Record Calls On Your PC USER’S GUIDE
Recorder Features Package Contents Congratulations on your purchase. Turn your PC into a full-featured recorder. Record phone calls, conversations, and meetings. 1. Personal Logger recording module — This module converts telephone audio into a format compatible with your PC USB port. One side connects to your phone, the other to the USB port. 2. RJ-11 outside line cord and connector kit — This cord and Y connector have larger jacks for connection to analog telephone lines. 3.
Quick Setup Use these shortcuts for a quick install. If this is your first installation, please skim the whole manual before proceeding. 1. Select the correct cable bag. Note that handsets use smaller plugs than outside lines. 2. Attach the USB cable between the logger and your PC. 3. Wait for Windows to detect the logger and install USB drivers automatically. Wait for drivers to load before inserting the CD. 4. Install the software CD and select Install Recording Software. 5.
Software Installation Insert the CD. The installation window appears: Click Install Recording Software, then Install Personal Logger Select a destination folder for the program, and a location for the recording files. For best streaming audio performance, record calls to a local hard drive. Most users will install the program in “standard” mode. The “hidden” mode eliminates the user interface and records in the background.
The sound activation trigger level is adjustable. The small line inside the level meter is the trigger level. Recording starts whenever the sound level moves to the right of the line. This trigger level can be adjusted using the “sensitivity” slider bar in the lower right corner of the program. With your phone on-hook, set this trigger level slightly to the right of the level meter. Recording continues until a specified period of silence is detected.
Select a new folder and click OK. Recordings are grouped into daily subfolders like this: Self-Help Instant Replay Select Show the Instant Replay Window from the View menu to play calls. Select a call first, then use the shortcut buttons to control play, email, and export files. I’m not getting any audio at all. Check cabling first. Note that two different sets of cables come with the recorder. The smaller plugs are only for handsets, and the larger connectors are only for outside lines.
Slide the volume up on the MIC level, and uncheck MUTE. If your control panel has a SELECT box, select only the microphone, and de-select the others. Windows Audio Control Panel Shortcuts In XP, click Start then Run and enter sndvol32 –r In Vista or Windows 7, click Start then Run then mmsys.cpl ..1 I get a 'Device already in use' error message. Another program, such as Skype, Windows Recorder or Real Player is locking out AK5371, microphone or speaker resources. Close that application.
Limited Five-Year Warranty FCC Approval The terms of this warranty may be legally binding. If you do not agree to the terms listed below, return the product immediately in its original unopened condition for a full refund. The software, firmware, and accompanying written materials are provided “AS–IS” without warranty of any kind. The purchaser assumes the entire risk as to the results and performance of the unit.
Download a Manual Frequently Asked Questions Register Online for: • Free Tech Support • Free Upgrades 2695 Walsh Avenue, Santa Clara, CA 95051 Tel: (408) 330-5599, Fax: (408) 541-8459 www.digital-loggers.
