User`s guide

Using the Front Panel Interface 5-21
The test continues running until you end it.
2 To end the test, press
and
ENTER.
The name of the terminated test appears in the TEST menu.
During a Test
During a test, observe the following:
¥ The
TEST LED on the front panel turns green, indicating the
DL600E
unit is out of service during the test.
¥ The name of the current test appears on the display with a
plus (+) at the end.
¥ You can open the
MONITOR or CONFIGURATION menus to view
the performance information or change the conÞguration.
¥ To exit the TEST menu, use
EXIT.
TEST
ENTER
SELF TEST (OK)
LOOP NET
LOOP PAYLOAD
LPUP REMOTE
TEST PATTERN
LOOP DTE
LPDN REMOTE
LAMP TEST
END TEST