User`s guide

Using the Front Panel Interface 5-19
Using the MONITOR Menu
Use the MONITOR menu to display network status, DTE status and the
network error counter.
The 24 hour line data is only available with the terminal interface or
through the Network Manager.
The data in the monitor menu is a subset of the parameters available on
the terminal interface or through the Network Manager.
Both the Monitor and ConÞguration Menus can also access the remote
unit.
Remote monitoring and conÞguration are only available with an IBC
(In-Band Communications) channel attached to the remote unit. When
you request status or conÞguration information from the remote unit,
the local unit sends a request to it over IBC.
Monitoring the Local and Remote Units
The parameters in the MONITOR menu are
MONITOR
CONFIGURATION
TEST
EFS 100 PERCENT
ENTER
CRC 8
CV 103
NET LOS,
MONITOR
UNIT NO CLOCK
REMOTE MONITOR
EXT ALARM OFF
FE 8
DATA LOSS 1
AUX