User`s guide

Using the Front Panel Interface 5-15
Displaying the Timeslot Allocation
To display the timeslot allocation for each port:
1 Press ENTER to open the CONFIGURATION menu and move to
TIMESLOT CONFIG using the Up or Down Arrows, then press
ENTER to open.
A submenu appears, such as TS CONF CONTIG.
2 To see the timeslot allocation for port 1, press the Up Arrow.
To see the allocation for port 2, press the Up Arrow again.
Repeat for the other ports (if you have them).
Example:
The TIMESLOT CONFIG Menu
The TIMESLOT CONFIG menu offers three allocation methods:
CONTIG, ALT and MANUAL.
Refer to ÒAllocating TimeslotsÓ in Chapter 3 for more information.
TS CONF CONTIG
TIMESLOT CONFIG
ENTER
TS CONF CONTIG
DTE01 TS = 01 -- 31
DTE02 IDLE
Default timeslot allocation
TS CONF CONTIG
TS CONF MANUAL
TIMESLOT CONFIG