User`s guide

Using the Front Panel Interface 5-11
The NET CONFIG Menu
The NET CONFIG menu contains the following items:
For a description of these
items, refer to Menu-4 Main ConÞguration on
in Chapter 3.
Notable Differences in the Front Panel Interface Three items are
signiÞcantly different in this section from the terminal interface:
¥ Setting the external clock rate in
NET TIMING
¥ Enabling in NET IBC
¥ Changing the full bandwidth and fractional bandwidth loop
codes in
LPCODE and FLPCODE respectively
These items are described in the following section.
Setting External Timing
You can set the external clock rate only from the front panel NET
TIMING
menu.
NET TIMING submenu
Use
EXT CLK in this submenu.
1 Set the MAIN or BKUP clock source to EXT in Menu-4 Main
ConÞguration. Refer to ÒMain/Alt SyncÓ in Chapter 3.
NET CONFIG
ENTER
NET CRC ENABLE/DISABLE
NET IMP 75O HMS/120 OHMS
FLPCODE STNDRD
NET TIMING
IN-BAND BIT 4/5/6/7/8/DIS
LPCODE STNDRD