User`s guide

Monitoring and Managing the DL600E Unit 4-11
Signal Loss and Local Test are mutually exclusive because the
DL600E unit uses the same interface lines to initiate the test and
to indicate the signal loss.
Displaying Performance Reports
To manage and monitor the DL600E unit, use Menu-3 Performance
Reports which displays
performance data for the previous 24 hours.
Figure
4-3 shows an example of the DL600E as a remote unit.
SW Ver 1.0 MIB Ver 1.2 Digital Link DL600 Encore 4/22/96
HW Ver A Menu-3 Performance Reports 12:40:12
Carrier Registers, 24 hour detail
Local: OAHU Remote: MAUI
Local Interval
Star ES CRC CV FE ES CRC CV
03:38:53 0 123 2 12 6 65 4
03:23:53 0 0 3 8 2 5 0
03:08:53 2 65 157 18 3 17 8
02:53:53 9 0 32 7 7 15 6
02:38:53 0 123 2 12 6 65 4
02:23:53 0 0 3 8 2 5 0
02:08:53 2 65 157 18 3 17 8
01:53:53 9 0 32 7 7 15 6
01:38:53 0 123 2 12 1 65 4
01:23:53 2 65 157 8 3 17 8
01:08:53 0 2 3 8 2 5 0
12:53:53 9 0 32 7 7 15 6
Page 1 of 8
0-SNMP Config.1-Main Status 2-Data DTE Status 3-Reports 4-Main Config.
5-Data Port Config.6-Timeslot Config.7-Alarm I 8-Alarm II 9-Diagnostics
Type the UP and DOWN arrow keys to scroll,
or type 0 through 9 for a new menu:
Figure 4-3 Carrier Registers, 24 hour Detail