User`s guide

Monitoring and Managing the DL600E Unit 4-5
Logging On Using a Telnet Connection
To log on to the DL600E user interface using a Telnet connection:
1 Enter the telnet command and the DL600E IP address.
Example of system response:
Current Unit ID is MAUI.
Now you need a password to log in:
2 Enter the Normal User or Superuser password.
Logging On In Other Conditions
The system responds differently depending on the log on conditions on
the DL600E unit.
The system logs you off after Þve unsuccessful attempts to log on.
System messages and your action Condition on DL600E
Case A
System
:
Current Unit ID is MAUI.
The Terminal User Interface is already in use. Please
enter the Superuser password to force the other user to
log off or type <Ctrl-X> and try again later.
Normal User logged on
¥ Enter
Superuser password to log off Normal User.
System: Password: (example)
¥ Enter the
Superuser password a second time to log
on as the Superuser or enter the
Normal User
password to log on as Normal User.
If you donÕt know the
Superuser password log off
with Ctrl-x and try again later.
Case B
System
:
Current Unit ID is MAUI.
The Superuser is already logged in to the Terminal User
Interface. Please type <Ctrl-X> and try again later.
Superuser logged on.
You canÕt log on.