User`s guide

Monitoring and Managing the DL600E Unit 4-3
¥ Change both passwords
¥ Clear both passwords giving Superuser access to all users
With the
Normal User password, you can:
¥ Log on only when no one is logged on
¥ Be logged off by a
Superuser
The Superuser and Normal User passwords are set in Menu-8 Alarms II.
Refer to ÒConÞguring Two Level of Access RightsÓ in Chapter 3.
The conditions for logging on differ when the DL600E terminal
interface is free and when another user is already logged on. They are
described in the following sections.
Logging on from a Terminal
You must know the DL600E ID to log on to it. Press Ctrl-x Þve times to
display all IDs of cards connected in a daisy-chain (a single
RS-232
multidrop).
The default ID, a six-character alphanumeric, is the DSUÕs portion of the
serial number, for example: FE0086.
To log on to the DL600E unit when no other user is logged on:
1 Press Ctrl-x, type the unit ID and press Return.
2 If the unit is password protected and no other user is logged
on, you are prompted:
Current Unit ID is MAUI.
Now you need a password to log in:
Type in the Superuser or Normal User password and press
Return.
Menu-1 Main Status appears.
If it does not, you may have an incorrect
ID, a bad connection
on the Comm Port or a bad Comm Port conÞguration.
Systems with blank IDs are always logged on and cannot be logged
off until a unit
ID is assigned.