User`s guide

4-2 DL600E E1 Data Multiplexer UserÕs Guide
Introduction
The DL600E unit collects and displays performance data as well as
additional data useful for network troubleshooting.
You can monitor and manage the unit from a terminal, remote terminal
Telnet connection, or an
SNMP management station.
The DL600E unit monitors the
E1 line continuously and displays all
collected data on the terminal screen.
The terminal interface menus enable you to:
¥ Display or modify the
E1 network conÞguration in Menu-4
Main ConÞguration
¥ ConÞgure alarm conditions, passwords, and modem
connection in
Menu-7 Alarm I and Menu-8 Alarm II
¥ Monitor the status of the E1 network, AUX E1 port, and data
ports in
Menu-1 Main Status and Menu-2 Data DTE Status,
respectively.
¥ Monitor the E1 performance data base in Menu-3 Performance
Reports
This chapter describes how to monitor the DL600E status, display
performance reports and conÞgure alarm conditions.
Logging on to the DL600E
There are two ways to access the DL600E terminal interface:
¥ From a terminal connected (directly or through a modem) to
the DL600E Comm Port
¥ From a remote terminal Telnet connection
User Access Rights
Two levels of access rights are available when you log on to the DL600E
unit:
¥ Superuser access rights
¥ Normal User access rights
With the Superuser password, you can:
¥ Log off a
Normal User already logged on the DL600E unit