User`s guide

Regulatory Compliance Standards

To maintain EMC Class B (CE Label) compliance, shielded cables should be used with

the unit.

The Digital Link DL600E module complies with

¥ CE MARK

¥ BABT NTR4

¥ Austel TS016

¥ Swedish SS636334

¥ German M†9a/b

¥ Australian AS 3260

¥ FCC part 15 Class A

¥ UL 1950 3rd Edition

¥ CAN/CSA C22.2. No. 950-95 3rd Edition

European harmonized standards:

¥ 73/23/EEC

¥ 91/31/EEC

¥ 89/336/EEC

¥ 93/68/EEC

¥ 91/263/EEC

¥ 2 Mbit/s G703 (E1) interface against UK speciÞcation NTR4 (75 ohm unbal-

anced)

¥ 2 Mbit/s G.703 (E1) interface against CTR12 (120 ohm balanced, unstructured)

including protection test

¥ 2 Mbit/s G.703 (E1) interface against TBR13 (120 ohm balanced, structured)

including protection tests.

Under 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC, the DL600E was tested

in accordance with EN50081-1 (1995) and EN50082-1 (1994) to the following stan-

dards: EN55022 Level B, IEC 1000-4-2, ENV50140, ENV50141, IEC 1000-4-4,

ENV50142, EN61000-4-8,

and EN61000-4-11.

Under 73/23/EEC as amended by 93/68/EEC, the DL600E was tested to IEC 950 (1994)

3rd edition; EN 60950 (1992) 3rd edition. Under 91/263/EEC, this unit complies with the

Pan-european requirements set forth in CTR 12 and TBR 13.

Under 91/263/EEC this product complies with the requirements of Annex III for Pan-

European approval under CTR 12 and TBR 13 for 120 ohm operation. This information

is contained in a report prepared by KTL. This report was submitted to BABT with a

reference number: 1MST0400 and carries the BABT logo with the approval number:

AA607035.

168