User`s guide

3-20 DL600E E1 Data Multiplexer UserÕs Guide
Ñ Press i for IDLE and Return, then y to conÞrm.
Ñ A dashed blank line appears in timeslot
1.
Ñ Press L and y for Local in response to the prompt:
Do you want to change the local unit, the remote unit, or
both (L, R, or B)?
3 Use the same method to conÞgure the other slots to IDLE.
4 To conÞgure timeslots 3, 7, 9, 13 and 15 for Data Port 1.
Ñ Move to the speciÞc timeslot using the Arrows and press
Return to activate edit mode.
You are prompted to:
Ñ Type the
Up or Down arrows to change the selection, or
type a port number (NN or I for
IDLE):
Ñ Press 1 for data port 1, then Return and y.
is an example of the value
in the Allocate by Port Þeld.
_ _ _ _
DATA01 Fragmented 320 Kb/s ...