User`s guide

ConÞguring the DL600E Unit 3-9
Logging off
To log off, press Ctrl-x.
You are logged off when the terminal stops responding to your
keystrokes.
Before You Begin
To conÞgure the local or remote DL600E unit, use the menus in the
terminal interface or the
SNMP network management program.
The following sections describe how to use the terminal interface.
Using the Terminal Interface
To use the terminal interface, you must Þrst be in Terminal Mode.
Terminal Mode
is the default mode.
The terminal interface contains a number of menus for conÞguring,
monitoring and managing the DL600E unit.
To select a menu, press the menu number, as indicated at the bottom of
the screen.
To redraw a screen, press Ctrl-L.
Setting a Parameter in a Menu
Use the following method to select a parameter, set it and conÞrm your
action:
¥ Move the cursor to the parameter Þeld using the Arrows and
press
Return to put the Þeld in edit mode (highlighted and
blinking
).
¥ Cycle through the available options using the Up and Down
Arrow. Stop at the desired option and press Return to select it
or, where appropriate, type the required value.
¥ Type y to conÞrm your action when prompted.
You can also use the
u (up), d (down), r (right), and l (left) keys
instead of the Arrow keys.
Overview of the ConÞguration
To conÞgure the local or remote DL600E unit, set the following
parameters:
¥ Date, Time and E1 network parameters in Menu-4 Main
ConÞguration