User`s guide

3-8 DL600E E1 Data Multiplexer UserÕs Guide
Logging on Using a Telnet Connection
To log on to the DL600E unit user interface using a Telnet connection:
1 Enter the telnet command and the DL600E IP address.
Example of system response:
Current Unit ID is MAUI.
Now you need a password to log in:
2 Enter the Normal User or Superuser password.
The system logs you off after Þve unsuccessful attempts to log on.
Logging on in Other Conditions The system responds differently
depending on the log on conditions on the DL600E unit.
System messages and user action Condition on
DL600E
Case A
System
:
Current Unit ID is MAUI.
The Terminal User Interface is already in use. Enter the
Superuser password to force the other user to log off or
type <Ctrl-X> and try again later.
Normal User logged
on.
¥ Enter the
Superuser password to log off the
Normal User.
System: Password: (example)
¥ Enter the
Superuser password a second time to log
on as the Superuser or enter the
Normal User
password to log on as the Normal User.
If you donÕt know the
Superuser password log off
with Ctrl-x and try again later.
Case B
System
:
Current Unit ID is MAUI.
The Superuser is already logged in to the Terminal User
Interface. Please type <Ctrl-X> and try again later.
Superuser logged on.
You canÕt log on.