User`s guide

ConÞguring the DL600E Unit 3-7
2 If the unit is password protected and no other user is logged
on, you are prompted:
Current Unit ID is MAUI.
Now you need a password to log in:
Type in the Superuser or Normal User password and press
Return.
Menu-1 Main Status appears. (Refer to Chapter 4.)
If it does not, you may have an incorrect
ID, a bad connection
on the Comm Port or a bad Comm Port conÞguration.
Systems with blank IDs are always logged on and cannot be logged
off until a unit
ID is assigned.
Logging on in Other Conditions The system responds differently
depending on the log on conditions on the
DL600E unit.
D
Note: The system forces you off after a Þfth unsuccessful
attempt to log on.
System messages and user action Condition on
DL600E
Case A
System
:
Current Unit ID is MAUI.
The Terminal User Interface is already in use. Enter the
Superuser password to force the other user to log off or
type <Ctrl-X> and try again later.
Normal User logged on
using
telnet.
¥ Enter
Superuser password to log off Normal User.
¥ Enter
Superuser password a second time when
prompted to log on as Superuser or enter
Normal
User
password to log on as Normal User.
If you donÕt know the
Superuser password, log off
with Ctrl-x and try again later.
Case B
System
:
The Superuser is already logged on.
Try again later
.
Superuser logged on.
You canÕt log on.