User`s guide

2-6 DL600E E1 Data Multiplexer UserÕs Guide
8 To minimize disturbance to the wires through casual contact,
secure the DC cable to the rack frame using multiple cable
ties. Use at least four cable ties, a minimum of
4 inches
(10.16 cm.) apart. The Þrst tie should be within
6 inches
(15.24 cm.)
of the terminal block. (A cable tie mount is
provided.)
9 Turn on the DC power source.
The LEDs on the front panel ßash as the DL600E unit
automatically runs the
Self Test at power up. The PWR/TEST
LED
blinks yellow and then turns green when the test is
successful. If the test fails, the
LED turns red for ten seconds
and then green.