User guide

3-14 Solo E1 DSU User Guide—June 1998

b. Press the enter key to activate edit mode.

Type a port number (NN for a data port, I for Idle, or the

UP or Down arrow):

c. Type 1

For DATA port 1. (You can specify only port 1.)

d. Press the enter key.

Menu-6 displays DATA01 in Allocate by Port (Þrst Þeld).

At the bottom of the screen you will see:

Type the start timeslot (NN), or 0, or I for IDLE or the UP

or DOWN arrows:

3. Set the start and end timeslots:

a. Type 1 and press the enter key to set the start timeslot to

Menu-6 displays DATA01 TS01. The end timeslot Þeld blinks.

Please type the end timeslot (NN):

b. Type 14, press the enter key, and type y to set the end

timeslot to 14.

Allocate by Port displays DATA01 TS01-TS14 896 Kb/s

timeslots 1 through 14 are allocated to port 1; all other slots are

idle.

If a remote unit is attached, you will get the following message:

Do you want to change the local unit, the remote, or both

(L, R, or B):

i. Press r for remote.

Do you really want to change the conÞguration? [Y/N]

c. Press y for yes.

Allocating Timeslots Manually

In this example, you will set timeslot to Idle mode. All timeslot are

conÞgured individually using the same procedure.

1. Edit the Allocation Type parameter.