User guide

Configuration 3-13
3
Figure 3-5 Menu-6 Timeslot Config. in Default Mode
Allocating Contiguous Timeslots
In this example, we allocate DATA port 1, slots 1 through 14, and start with
the default statusÑthe allocation mode is Contiguous.
To allocate DATA port 1Ñslots 1 through 14:
1. Set Allocation Type to Contiguous:
a. Select Allocation Type.
Use the arrow keys to move to this Þeld.
b. Press the Return key to activate edit mode.
c. Select Contiguous.
Use the up/down arrow keys. Press the Return key to choose
Contiguous. Type y to conÞrm this action.
2. Allocate by Port:
a. Select the Allocation by Port parameter.
Use the arrow keys to move to this Þeld.