User guide

3-12 Solo E1 DSU User Guide—June 1998
3
Allocating Timeslots
The default factory network timeslot allocation for bandwidth is 31 DS0
timeslots allocated to DATA port 1 (Figure 3-5):
¥ Allocate by PortÑdisplays allocated timeslots for one port at a time
only.
¥ Network Time Slot Map displays the entire timeslot conÞguration.
¥ The default factory allocation appears in Allocate by Port as: DATA01
TS01-TS31 1984Kb/s
Allocation Methods
Select the allocation method in the Allocation Type Þeld:
¥ Contiguous (default)ÑAllocate timeslots in a contiguous order.
¥ ManualÑThe manual method allows you to allocate timeslots in an
arbitrary random order.
Format
(V.35)
X.21
V.35
Select V.35 or X.21 operation.
Clock
(+SCT)
+SCT
-SCT
SCTE
For DTE timing, select SCT. You can invert the
clock (-SCT) or not (+SCT).
Use SCT inversion (-SCT) or SCTE to correct
delays in clocking due to cable length.
When the
DATA port is a DTE, SCTE is the
only
DATA port timing option.
NOTE: Navigate these fields with the arrow keys. To edit a field,
navigate to that field, and press the Return key to activate Edit mode.
Make your selection and press the Return key again to set that choice.
In some cases, the Solo E1 DSU requests that you confirm your action.
Type y to do so, or any other key to stop the process.
Table 3-4 Menu-5 Data Config.
Parameter
(Default) Settings Description