User guide

Configuration 3-11
3
Configuring the DATA Port
To conÞgure the DATA port, select Menu-5 Data ConÞguration (Figure
3-4).
Figure 3-4 Menu-5 Data Config.
Table 3-4 describes the parameters of Figure 3-4.
Table 3-4 Menu-5 Data Config.
Parameter
(Default) Settings Description
Loss
(RTS)
DTR
RTS
None
Select the criteria for detecting loss of signal on
the
DATA port. The loss appears when
detected by the Solo E1.
Mode
(DCE)
DTE
DCE
Configure the
DATA port as a DTE (Data
Terminal Equipment) or a DCE (Data Circuit
Equipment).