User guide

Configuration 3-7
3
5. Choose the desired option by pressing the Return key to select
that option.
6. If prompted to conÞrm your action, type y.
If you type any other key, your action is denied. If you use the
escape (ESC) key, you will leave the Þeld unchanged.
To access the functions and features, the Solo E1 DSU uses the menus
shown in Table 3-2.
First time configuration for local or remote
Set the items in this order for proper functionality:
1. Unit ID, Date, Time and E1 network parameters
2. DATA port parameters
3. Timeslot allocations
4. SNMP parameters (if required)
5. Alarm conditions, thresholds, and passwords
Basic Parameters Using Menu-4 Main Configuration
To conÞgure the basic parameters, use Menu-4 Main ConÞguration (Figure
3-2). The content of this menu depends on the Solo E1 DSU conÞguration.
Table 3-2 Solo E1 DSU Terminal Interface Menus
Menu Function Description Reference
0 SNMP Configuration “Menu-0 SNMP Configuration” on page 3-15
1 Main Status “Menu-1 Main Status” on page 4-2
2 Data Status “Menu-2 Data Status” on page 4-5
3 Performance Reports “Check Efficiency with Menu-3 Performance Reports”
on page 4-6
4 Main Configuration “Basic Parameters Using Menu-4 Main Configuration”
on page 3-7
5 Data Configuration “Configuring the DATA Port” on page 3-11
6 Timeslot Configuration “Allocating Timeslots” on page 3-12
8 Alarm II “Menu-8 Alarm II Configurations” on page 3-19
9 Diagnostics “Running A Diagnostic” on page 5-1