User guide

3-6 Solo E1 DSU User Guide—June 1998
3
To access a menu, enter the code (press one of the 0, 1, 2, 3, 4, 5, 6, 7, 8, or
9 keys) for that menu. Modify information in the menus that appears in
bold-face. The arrow keys provide movement through the settings and also
offer choices for each setting.
To redraw the screen anytime, press Ctrl-l (control-lowercase L for refresh).
When you log on, the Solo E1 DSU displays Menu-1 Main Status (Figure
3-1). (Refer to ÒMenu-1 Main StatusÓ on page 4-2 for more information.)
Setting a Parameter
To set or change a parameter:
1. Choose the menu.
2. Use the up and down arrow keys to move to the value you
want to change.
If you want to access the time and date Þeld, you must use the right
and left arrow in Menu-4.
3. Press Return to activate edit mode (the Þeld blinks).
4. Use the up or down arrow keys to cycle through the available
options.
Table 3-1 Navigation Keys
Keys Use to:
Arrow Navigate a parameter choice.
Number Choose a menu, or (if in Diagnostics) a test.
Ctrl-X End session.
Alphanumeric Suggest a parameter, enter a Unit ID, Time, Date, etc.
Return Accept a change, or edit a parameter.
NOTE: The u (up), d (down), r (right), and l (left) keys also function as
arrow keys. If a remote unit is connected, the r and l key functions are
changed to move the cursor from the remote (r) to local (l) fields. Use
the up (u) and down (d) keys to move within the respective unit field
items.